MakeItFrom.com
Menu (ESC)

6162 Aluminum vs. N06255 Nickel

6162 aluminum belongs to the aluminum alloys classification, while N06255 nickel belongs to the nickel alloys. There are 26 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6162 aluminum and the bottom bar is N06255 nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
210
Elongation at Break, % 6.7 to 9.1
45
Fatigue Strength, MPa 100 to 130
210
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
81
Shear Strength, MPa 170 to 180
460
Tensile Strength: Ultimate (UTS), MPa 290 to 300
660
Tensile Strength: Yield (Proof), MPa 260 to 270
250

Thermal Properties

Latent Heat of Fusion, J/g 400
320
Maximum Temperature: Mechanical, °C 160
1000
Melting Completion (Liquidus), °C 640
1470
Melting Onset (Solidus), °C 620
1420
Specific Heat Capacity, J/kg-K 900
450
Thermal Expansion, µm/m-K 23
13

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
55
Density, g/cm3 2.7
8.5
Embodied Carbon, kg CO2/kg material 8.3
9.4
Embodied Energy, MJ/kg 150
130
Embodied Water, L/kg 1180
270

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 19 to 26
230
Resilience: Unit (Modulus of Resilience), kJ/m3 510 to 550
150
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
23
Strength to Weight: Axial, points 29 to 30
22
Strength to Weight: Bending, points 36
20
Thermal Shock Resistance, points 13
17

Alloy Composition

Aluminum (Al), % 96.7 to 98.9
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0 to 0.1
23 to 26
Copper (Cu), % 0 to 0.2
0 to 1.2
Iron (Fe), % 0 to 0.5
6.0 to 24
Magnesium (Mg), % 0.7 to 1.1
0
Manganese (Mn), % 0 to 0.1
0 to 1.0
Molybdenum (Mo), % 0
6.0 to 9.0
Nickel (Ni), % 0
47 to 52
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0.4 to 0.8
0 to 1.0
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.1
0 to 0.69
Tungsten (W), % 0
0 to 3.0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0