MakeItFrom.com
Menu (ESC)

6182 Aluminum vs. ACI-ASTM CH20 Steel

6182 aluminum belongs to the aluminum alloys classification, while ACI-ASTM CH20 steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6182 aluminum and the bottom bar is ACI-ASTM CH20 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 6.8 to 13
38
Fatigue Strength, MPa 63 to 99
290
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 26
78
Tensile Strength: Ultimate (UTS), MPa 230 to 320
610
Tensile Strength: Yield (Proof), MPa 130 to 270
350

Thermal Properties

Latent Heat of Fusion, J/g 410
310
Maximum Temperature: Mechanical, °C 190
1100
Melting Completion (Liquidus), °C 640
1410
Melting Onset (Solidus), °C 600
1430
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 160
14
Thermal Expansion, µm/m-K 23
15

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 130
2.3

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
20
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.4
3.7
Embodied Energy, MJ/kg 150
53
Embodied Water, L/kg 1170
180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21 to 26
200
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 520
300
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 23 to 32
22
Strength to Weight: Bending, points 30 to 38
21
Thermal Diffusivity, mm2/s 65
3.7
Thermal Shock Resistance, points 10 to 14
15

Alloy Composition

Aluminum (Al), % 95 to 97.9
0
Carbon (C), % 0
0 to 0.2
Chromium (Cr), % 0 to 0.25
22 to 26
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.5
54.7 to 66
Magnesium (Mg), % 0.7 to 1.2
0
Manganese (Mn), % 0.5 to 1.0
0 to 1.5
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0
12 to 15
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0.9 to 1.3
0 to 2.0
Sulfur (S), % 0
0 to 0.040
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0.050 to 0.2
0
Residuals, % 0 to 0.15
0