MakeItFrom.com
Menu (ESC)

6182 Aluminum vs. ASTM A372 Grade M Steel

6182 aluminum belongs to the aluminum alloys classification, while ASTM A372 grade M steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6182 aluminum and the bottom bar is ASTM A372 grade M steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 6.8 to 13
18 to 21
Fatigue Strength, MPa 63 to 99
450 to 520
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 140 to 190
510 to 570
Tensile Strength: Ultimate (UTS), MPa 230 to 320
810 to 910
Tensile Strength: Yield (Proof), MPa 130 to 270
660 to 770

Thermal Properties

Latent Heat of Fusion, J/g 410
250
Maximum Temperature: Mechanical, °C 190
450
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 600
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
46
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
8.0
Electrical Conductivity: Equal Weight (Specific), % IACS 130
9.1

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
5.0
Density, g/cm3 2.7
7.9
Embodied Carbon, kg CO2/kg material 8.4
2.0
Embodied Energy, MJ/kg 150
27
Embodied Water, L/kg 1170
61

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21 to 26
160
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 520
1140 to 1580
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 23 to 32
29 to 32
Strength to Weight: Bending, points 30 to 38
24 to 27
Thermal Diffusivity, mm2/s 65
12
Thermal Shock Resistance, points 10 to 14
24 to 27

Alloy Composition

Aluminum (Al), % 95 to 97.9
0
Carbon (C), % 0
0 to 0.23
Chromium (Cr), % 0 to 0.25
1.5 to 2.0
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.5
92.5 to 95.1
Magnesium (Mg), % 0.7 to 1.2
0
Manganese (Mn), % 0.5 to 1.0
0.2 to 0.4
Molybdenum (Mo), % 0
0.4 to 0.6
Nickel (Ni), % 0
2.8 to 3.9
Phosphorus (P), % 0
0 to 0.015
Silicon (Si), % 0.9 to 1.3
0 to 0.3
Sulfur (S), % 0
0 to 0.010
Titanium (Ti), % 0 to 0.1
0
Vanadium (V), % 0
0 to 0.080
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0.050 to 0.2
0
Residuals, % 0 to 0.15
0

Comparable Variants