MakeItFrom.com
Menu (ESC)

6182 Aluminum vs. EN 1.4959 Stainless Steel

6182 aluminum belongs to the aluminum alloys classification, while EN 1.4959 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6182 aluminum and the bottom bar is EN 1.4959 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 6.8 to 13
40
Fatigue Strength, MPa 63 to 99
170
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
77
Shear Strength, MPa 140 to 190
430
Tensile Strength: Ultimate (UTS), MPa 230 to 320
630
Tensile Strength: Yield (Proof), MPa 130 to 270
190

Thermal Properties

Latent Heat of Fusion, J/g 410
300
Maximum Temperature: Mechanical, °C 190
1090
Melting Completion (Liquidus), °C 640
1400
Melting Onset (Solidus), °C 600
1350
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 160
12
Thermal Expansion, µm/m-K 23
15

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 130
2.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
31
Density, g/cm3 2.7
8.0
Embodied Carbon, kg CO2/kg material 8.4
5.4
Embodied Energy, MJ/kg 150
76
Embodied Water, L/kg 1170
200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21 to 26
190
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 520
96
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 23 to 32
22
Strength to Weight: Bending, points 30 to 38
20
Thermal Diffusivity, mm2/s 65
3.2
Thermal Shock Resistance, points 10 to 14
15

Alloy Composition

Aluminum (Al), % 95 to 97.9
0.25 to 0.65
Carbon (C), % 0
0.050 to 0.1
Chromium (Cr), % 0 to 0.25
19 to 22
Cobalt (Co), % 0
0 to 0.5
Copper (Cu), % 0 to 0.1
0 to 0.5
Iron (Fe), % 0 to 0.5
39.4 to 50.5
Magnesium (Mg), % 0.7 to 1.2
0
Manganese (Mn), % 0.5 to 1.0
0 to 1.5
Nickel (Ni), % 0
30 to 34
Nitrogen (N), % 0
0 to 0.030
Phosphorus (P), % 0
0 to 0.015
Silicon (Si), % 0.9 to 1.3
0 to 0.7
Sulfur (S), % 0
0 to 0.010
Titanium (Ti), % 0 to 0.1
0.25 to 0.65
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0.050 to 0.2
0
Residuals, % 0 to 0.15
0