MakeItFrom.com
Menu (ESC)

6182 Aluminum vs. EN 1.7230 Steel

6182 aluminum belongs to the aluminum alloys classification, while EN 1.7230 steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6182 aluminum and the bottom bar is EN 1.7230 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 6.8 to 13
11 to 12
Fatigue Strength, MPa 63 to 99
320 to 460
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Tensile Strength: Ultimate (UTS), MPa 230 to 320
720 to 910
Tensile Strength: Yield (Proof), MPa 130 to 270
510 to 740

Thermal Properties

Latent Heat of Fusion, J/g 410
250
Maximum Temperature: Mechanical, °C 190
420
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 600
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
44
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
7.3
Electrical Conductivity: Equal Weight (Specific), % IACS 130
8.4

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
2.4
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.4
1.5
Embodied Energy, MJ/kg 150
20
Embodied Water, L/kg 1170
51

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21 to 26
79 to 97
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 520
700 to 1460
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 23 to 32
26 to 32
Strength to Weight: Bending, points 30 to 38
23 to 27
Thermal Diffusivity, mm2/s 65
12
Thermal Shock Resistance, points 10 to 14
21 to 27

Alloy Composition

Aluminum (Al), % 95 to 97.9
0
Carbon (C), % 0
0.3 to 0.37
Chromium (Cr), % 0 to 0.25
0.8 to 1.2
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.5
96.7 to 98.3
Magnesium (Mg), % 0.7 to 1.2
0
Manganese (Mn), % 0.5 to 1.0
0.5 to 0.8
Molybdenum (Mo), % 0
0.15 to 0.3
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0.9 to 1.3
0 to 0.6
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0.050 to 0.2
0
Residuals, % 0 to 0.15
0

Comparable Variants