MakeItFrom.com
Menu (ESC)

6182 Aluminum vs. EN 2.4851 Nickel

6182 aluminum belongs to the aluminum alloys classification, while EN 2.4851 nickel belongs to the nickel alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6182 aluminum and the bottom bar is EN 2.4851 nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 6.8 to 13
34
Fatigue Strength, MPa 63 to 99
170
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
76
Shear Strength, MPa 140 to 190
430
Tensile Strength: Ultimate (UTS), MPa 230 to 320
650
Tensile Strength: Yield (Proof), MPa 130 to 270
230

Thermal Properties

Latent Heat of Fusion, J/g 410
320
Maximum Temperature: Mechanical, °C 190
1200
Melting Completion (Liquidus), °C 640
1360
Melting Onset (Solidus), °C 600
1310
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
11
Thermal Expansion, µm/m-K 23
14

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
1.4
Electrical Conductivity: Equal Weight (Specific), % IACS 130
1.6

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
49
Density, g/cm3 2.7
8.2
Embodied Carbon, kg CO2/kg material 8.4
8.1
Embodied Energy, MJ/kg 150
120
Embodied Water, L/kg 1170
280

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21 to 26
170
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 520
130
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
23
Strength to Weight: Axial, points 23 to 32
22
Strength to Weight: Bending, points 30 to 38
20
Thermal Diffusivity, mm2/s 65
2.9
Thermal Shock Resistance, points 10 to 14
17

Alloy Composition

Aluminum (Al), % 95 to 97.9
1.0 to 1.7
Boron (B), % 0
0 to 0.0060
Carbon (C), % 0
0.030 to 0.1
Chromium (Cr), % 0 to 0.25
21 to 25
Copper (Cu), % 0 to 0.1
0 to 0.5
Iron (Fe), % 0 to 0.5
7.7 to 18
Magnesium (Mg), % 0.7 to 1.2
0
Manganese (Mn), % 0.5 to 1.0
0 to 1.0
Nickel (Ni), % 0
58 to 63
Phosphorus (P), % 0
0 to 0.020
Silicon (Si), % 0.9 to 1.3
0 to 0.5
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.1
0 to 0.5
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0.050 to 0.2
0
Residuals, % 0 to 0.15
0