6182 Aluminum vs. SAE-AISI 8645 Steel
6182 aluminum belongs to the aluminum alloys classification, while SAE-AISI 8645 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 6182 aluminum and the bottom bar is SAE-AISI 8645 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 70 | |
190 |
Elongation at Break, % | 6.8 to 13 | |
12 to 23 |
Fatigue Strength, MPa | 63 to 99 | |
280 to 350 |
Poisson's Ratio | 0.33 | |
0.29 |
Shear Modulus, GPa | 26 | |
73 |
Shear Strength, MPa | 140 to 190 | |
380 to 400 |
Tensile Strength: Ultimate (UTS), MPa | 230 to 320 | |
600 to 670 |
Tensile Strength: Yield (Proof), MPa | 130 to 270 | |
390 to 560 |
Thermal Properties
Latent Heat of Fusion, J/g | 410 | |
250 |
Maximum Temperature: Mechanical, °C | 190 | |
410 |
Melting Completion (Liquidus), °C | 640 | |
1460 |
Melting Onset (Solidus), °C | 600 | |
1420 |
Specific Heat Capacity, J/kg-K | 900 | |
470 |
Thermal Conductivity, W/m-K | 160 | |
39 |
Thermal Expansion, µm/m-K | 23 | |
13 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 40 | |
7.3 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 130 | |
8.4 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 9.5 | |
2.6 |
Density, g/cm3 | 2.7 | |
7.8 |
Embodied Carbon, kg CO2/kg material | 8.4 | |
1.5 |
Embodied Energy, MJ/kg | 150 | |
20 |
Embodied Water, L/kg | 1170 | |
50 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 21 to 26 | |
77 to 120 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 110 to 520 | |
420 to 840 |
Stiffness to Weight: Axial, points | 14 | |
13 |
Stiffness to Weight: Bending, points | 50 | |
24 |
Strength to Weight: Axial, points | 23 to 32 | |
21 to 24 |
Strength to Weight: Bending, points | 30 to 38 | |
20 to 22 |
Thermal Diffusivity, mm2/s | 65 | |
10 |
Thermal Shock Resistance, points | 10 to 14 | |
18 to 20 |
Alloy Composition
Aluminum (Al), % | 95 to 97.9 | |
0 |
Carbon (C), % | 0 | |
0.43 to 0.48 |
Chromium (Cr), % | 0 to 0.25 | |
0.4 to 0.6 |
Copper (Cu), % | 0 to 0.1 | |
0 |
Iron (Fe), % | 0 to 0.5 | |
96.5 to 97.7 |
Magnesium (Mg), % | 0.7 to 1.2 | |
0 |
Manganese (Mn), % | 0.5 to 1.0 | |
0.75 to 1.0 |
Molybdenum (Mo), % | 0 | |
0.15 to 0.25 |
Nickel (Ni), % | 0 | |
0.4 to 0.7 |
Phosphorus (P), % | 0 | |
0 to 0.035 |
Silicon (Si), % | 0.9 to 1.3 | |
0.15 to 0.35 |
Sulfur (S), % | 0 | |
0 to 0.040 |
Titanium (Ti), % | 0 to 0.1 | |
0 |
Zinc (Zn), % | 0 to 0.2 | |
0 |
Zirconium (Zr), % | 0.050 to 0.2 | |
0 |
Residuals, % | 0 to 0.15 | |
0 |