MakeItFrom.com
Menu (ESC)

6182 Aluminum vs. S44537 Stainless Steel

6182 aluminum belongs to the aluminum alloys classification, while S44537 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6182 aluminum and the bottom bar is S44537 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 6.8 to 13
21
Fatigue Strength, MPa 63 to 99
230
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 26
79
Shear Strength, MPa 140 to 190
320
Tensile Strength: Ultimate (UTS), MPa 230 to 320
510
Tensile Strength: Yield (Proof), MPa 130 to 270
360

Thermal Properties

Latent Heat of Fusion, J/g 410
290
Maximum Temperature: Mechanical, °C 190
1000
Melting Completion (Liquidus), °C 640
1480
Melting Onset (Solidus), °C 600
1430
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
21
Thermal Expansion, µm/m-K 23
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
2.6
Electrical Conductivity: Equal Weight (Specific), % IACS 130
3.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
19
Density, g/cm3 2.7
7.9
Embodied Carbon, kg CO2/kg material 8.4
3.4
Embodied Energy, MJ/kg 150
50
Embodied Water, L/kg 1170
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21 to 26
95
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 520
320
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 23 to 32
18
Strength to Weight: Bending, points 30 to 38
18
Thermal Diffusivity, mm2/s 65
5.6
Thermal Shock Resistance, points 10 to 14
17

Alloy Composition

Aluminum (Al), % 95 to 97.9
0 to 0.1
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0 to 0.25
20 to 24
Copper (Cu), % 0 to 0.1
0 to 0.5
Iron (Fe), % 0 to 0.5
69 to 78.6
Lanthanum (La), % 0
0.040 to 0.2
Magnesium (Mg), % 0.7 to 1.2
0
Manganese (Mn), % 0.5 to 1.0
0 to 0.8
Nickel (Ni), % 0
0 to 0.5
Niobium (Nb), % 0
0.2 to 1.0
Nitrogen (N), % 0
0 to 0.040
Phosphorus (P), % 0
0 to 0.050
Silicon (Si), % 0.9 to 1.3
0.1 to 0.6
Sulfur (S), % 0
0 to 0.0060
Titanium (Ti), % 0 to 0.1
0.020 to 0.2
Tungsten (W), % 0
1.0 to 3.0
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0.050 to 0.2
0
Residuals, % 0 to 0.15
0