MakeItFrom.com
Menu (ESC)

6262 Aluminum vs. EN 1.0213 Steel

6262 aluminum belongs to the aluminum alloys classification, while EN 1.0213 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6262 aluminum and the bottom bar is EN 1.0213 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 4.6 to 10
12 to 25
Fatigue Strength, MPa 90 to 110
160 to 240
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 170 to 240
230 to 270
Tensile Strength: Ultimate (UTS), MPa 290 to 390
320 to 430
Tensile Strength: Yield (Proof), MPa 270 to 360
220 to 330

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 160
400
Melting Completion (Liquidus), °C 650
1470
Melting Onset (Solidus), °C 580
1430
Specific Heat Capacity, J/kg-K 890
470
Thermal Conductivity, W/m-K 170
53
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 44
6.9
Electrical Conductivity: Equal Weight (Specific), % IACS 140
7.9

Otherwise Unclassified Properties

Base Metal Price, % relative 10
1.8
Density, g/cm3 2.8
7.9
Embodied Carbon, kg CO2/kg material 8.3
1.4
Embodied Energy, MJ/kg 150
18
Embodied Water, L/kg 1190
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 17 to 31
33 to 98
Resilience: Unit (Modulus of Resilience), kJ/m3 530 to 940
120 to 300
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 48
24
Strength to Weight: Axial, points 29 to 39
11 to 15
Strength to Weight: Bending, points 35 to 42
13 to 16
Thermal Diffusivity, mm2/s 69
14
Thermal Shock Resistance, points 13 to 18
10 to 14

Alloy Composition

Aluminum (Al), % 94.7 to 97.8
0.020 to 0.060
Bismuth (Bi), % 0.4 to 0.7
0
Carbon (C), % 0
0.060 to 0.1
Chromium (Cr), % 0.040 to 0.14
0
Copper (Cu), % 0.15 to 0.4
0
Iron (Fe), % 0 to 0.7
99.245 to 99.67
Lead (Pb), % 0.4 to 0.7
0
Magnesium (Mg), % 0.8 to 1.2
0
Manganese (Mn), % 0 to 0.15
0.25 to 0.45
Phosphorus (P), % 0
0 to 0.020
Silicon (Si), % 0.4 to 0.8
0 to 0.1
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0