MakeItFrom.com
Menu (ESC)

6262 Aluminum vs. EN 1.4659 Stainless Steel

6262 aluminum belongs to the aluminum alloys classification, while EN 1.4659 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6262 aluminum and the bottom bar is EN 1.4659 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
210
Elongation at Break, % 4.6 to 10
49
Fatigue Strength, MPa 90 to 110
460
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
81
Shear Strength, MPa 170 to 240
640
Tensile Strength: Ultimate (UTS), MPa 290 to 390
900
Tensile Strength: Yield (Proof), MPa 270 to 360
480

Thermal Properties

Latent Heat of Fusion, J/g 400
300
Maximum Temperature: Mechanical, °C 160
1100
Melting Completion (Liquidus), °C 650
1480
Melting Onset (Solidus), °C 580
1430
Specific Heat Capacity, J/kg-K 890
460
Thermal Conductivity, W/m-K 170
12
Thermal Expansion, µm/m-K 23
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 44
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 140
1.9

Otherwise Unclassified Properties

Base Metal Price, % relative 10
37
Density, g/cm3 2.8
8.2
Embodied Carbon, kg CO2/kg material 8.3
6.5
Embodied Energy, MJ/kg 150
89
Embodied Water, L/kg 1190
220

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 17 to 31
370
Resilience: Unit (Modulus of Resilience), kJ/m3 530 to 940
550
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 48
24
Strength to Weight: Axial, points 29 to 39
31
Strength to Weight: Bending, points 35 to 42
25
Thermal Diffusivity, mm2/s 69
3.2
Thermal Shock Resistance, points 13 to 18
19

Alloy Composition

Aluminum (Al), % 94.7 to 97.8
0
Bismuth (Bi), % 0.4 to 0.7
0
Carbon (C), % 0
0 to 0.020
Chromium (Cr), % 0.040 to 0.14
23 to 25
Copper (Cu), % 0.15 to 0.4
1.0 to 2.0
Iron (Fe), % 0 to 0.7
35.7 to 45.7
Lead (Pb), % 0.4 to 0.7
0
Magnesium (Mg), % 0.8 to 1.2
0
Manganese (Mn), % 0 to 0.15
2.0 to 4.0
Molybdenum (Mo), % 0
5.5 to 6.5
Nickel (Ni), % 0
21 to 23
Nitrogen (N), % 0
0.35 to 0.5
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0.4 to 0.8
0 to 0.7
Sulfur (S), % 0
0 to 0.010
Titanium (Ti), % 0 to 0.15
0
Tungsten (W), % 0
1.5 to 2.5
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0