6262 Aluminum vs. EN 1.5662 Steel
6262 aluminum belongs to the aluminum alloys classification, while EN 1.5662 steel belongs to the iron alloys. There are 28 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 6262 aluminum and the bottom bar is EN 1.5662 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 68 | |
190 |
Elongation at Break, % | 4.6 to 10 | |
20 |
Fatigue Strength, MPa | 90 to 110 | |
380 to 450 |
Poisson's Ratio | 0.33 | |
0.29 |
Shear Modulus, GPa | 26 | |
73 |
Shear Strength, MPa | 170 to 240 | |
460 to 470 |
Tensile Strength: Ultimate (UTS), MPa | 290 to 390 | |
740 to 750 |
Tensile Strength: Yield (Proof), MPa | 270 to 360 | |
550 to 660 |
Thermal Properties
Latent Heat of Fusion, J/g | 400 | |
250 |
Maximum Temperature: Mechanical, °C | 160 | |
430 |
Melting Completion (Liquidus), °C | 650 | |
1460 |
Melting Onset (Solidus), °C | 580 | |
1410 |
Specific Heat Capacity, J/kg-K | 890 | |
470 |
Thermal Expansion, µm/m-K | 23 | |
13 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 44 | |
8.7 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 140 | |
9.8 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 10 | |
7.5 |
Density, g/cm3 | 2.8 | |
8.0 |
Embodied Carbon, kg CO2/kg material | 8.3 | |
2.3 |
Embodied Energy, MJ/kg | 150 | |
31 |
Embodied Water, L/kg | 1190 | |
63 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 17 to 31 | |
140 to 150 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 530 to 940 | |
810 to 1150 |
Stiffness to Weight: Axial, points | 13 | |
13 |
Stiffness to Weight: Bending, points | 48 | |
24 |
Strength to Weight: Axial, points | 29 to 39 | |
26 |
Strength to Weight: Bending, points | 35 to 42 | |
23 |
Thermal Shock Resistance, points | 13 to 18 | |
22 |
Alloy Composition
Aluminum (Al), % | 94.7 to 97.8 | |
0 |
Bismuth (Bi), % | 0.4 to 0.7 | |
0 |
Carbon (C), % | 0 | |
0 to 0.1 |
Chromium (Cr), % | 0.040 to 0.14 | |
0 |
Copper (Cu), % | 0.15 to 0.4 | |
0 |
Iron (Fe), % | 0 to 0.7 | |
88.6 to 91.2 |
Lead (Pb), % | 0.4 to 0.7 | |
0 |
Magnesium (Mg), % | 0.8 to 1.2 | |
0 |
Manganese (Mn), % | 0 to 0.15 | |
0.3 to 0.8 |
Molybdenum (Mo), % | 0 | |
0 to 0.1 |
Nickel (Ni), % | 0 | |
8.5 to 10 |
Phosphorus (P), % | 0 | |
0 to 0.020 |
Silicon (Si), % | 0.4 to 0.8 | |
0 to 0.35 |
Sulfur (S), % | 0 | |
0 to 0.0050 |
Titanium (Ti), % | 0 to 0.15 | |
0 |
Vanadium (V), % | 0 | |
0 to 0.050 |
Zinc (Zn), % | 0 to 0.25 | |
0 |
Residuals, % | 0 to 0.15 | |
0 |