MakeItFrom.com
Menu (ESC)

6262 Aluminum vs. C19500 Copper

6262 aluminum belongs to the aluminum alloys classification, while C19500 copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6262 aluminum and the bottom bar is C19500 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
120
Elongation at Break, % 4.6 to 10
2.3 to 38
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 26
44
Shear Strength, MPa 170 to 240
260 to 360
Tensile Strength: Ultimate (UTS), MPa 290 to 390
380 to 640
Tensile Strength: Yield (Proof), MPa 270 to 360
120 to 600

Thermal Properties

Latent Heat of Fusion, J/g 400
210
Maximum Temperature: Mechanical, °C 160
200
Melting Completion (Liquidus), °C 650
1090
Melting Onset (Solidus), °C 580
1090
Specific Heat Capacity, J/kg-K 890
390
Thermal Conductivity, W/m-K 170
200
Thermal Expansion, µm/m-K 23
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 44
50 to 56
Electrical Conductivity: Equal Weight (Specific), % IACS 140
50 to 57

Otherwise Unclassified Properties

Base Metal Price, % relative 10
31
Density, g/cm3 2.8
8.9
Embodied Carbon, kg CO2/kg material 8.3
2.7
Embodied Energy, MJ/kg 150
42
Embodied Water, L/kg 1190
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 17 to 31
14 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 530 to 940
59 to 1530
Stiffness to Weight: Axial, points 13
7.3
Stiffness to Weight: Bending, points 48
18
Strength to Weight: Axial, points 29 to 39
12 to 20
Strength to Weight: Bending, points 35 to 42
13 to 18
Thermal Diffusivity, mm2/s 69
58
Thermal Shock Resistance, points 13 to 18
13 to 23

Alloy Composition

Aluminum (Al), % 94.7 to 97.8
0 to 0.020
Bismuth (Bi), % 0.4 to 0.7
0
Chromium (Cr), % 0.040 to 0.14
0
Cobalt (Co), % 0
0.3 to 1.3
Copper (Cu), % 0.15 to 0.4
94.9 to 98.6
Iron (Fe), % 0 to 0.7
1.0 to 2.0
Lead (Pb), % 0.4 to 0.7
0 to 0.020
Magnesium (Mg), % 0.8 to 1.2
0
Manganese (Mn), % 0 to 0.15
0
Phosphorus (P), % 0
0.010 to 0.35
Silicon (Si), % 0.4 to 0.8
0
Tin (Sn), % 0
0.1 to 1.0
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0 to 0.2
Residuals, % 0
0 to 0.2