MakeItFrom.com
Menu (ESC)

6262A Aluminum vs. EN 1.4110 Stainless Steel

6262A aluminum belongs to the aluminum alloys classification, while EN 1.4110 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6262A aluminum and the bottom bar is EN 1.4110 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 4.5 to 11
11 to 14
Fatigue Strength, MPa 94 to 110
250 to 730
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
76
Shear Strength, MPa 190 to 240
470 to 1030
Tensile Strength: Ultimate (UTS), MPa 310 to 410
770 to 1720
Tensile Strength: Yield (Proof), MPa 270 to 370
430 to 1330

Thermal Properties

Latent Heat of Fusion, J/g 400
280
Maximum Temperature: Mechanical, °C 160
790
Melting Completion (Liquidus), °C 640
1440
Melting Onset (Solidus), °C 580
1400
Specific Heat Capacity, J/kg-K 890
480
Thermal Conductivity, W/m-K 170
30
Thermal Expansion, µm/m-K 23
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 45
2.8
Electrical Conductivity: Equal Weight (Specific), % IACS 140
3.2

Otherwise Unclassified Properties

Base Metal Price, % relative 11
8.0
Density, g/cm3 2.8
7.7
Embodied Carbon, kg CO2/kg material 8.4
2.3
Embodied Energy, MJ/kg 150
33
Embodied Water, L/kg 1190
110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 17 to 34
90 to 180
Resilience: Unit (Modulus of Resilience), kJ/m3 540 to 1000
480 to 4550
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 49
25
Strength to Weight: Axial, points 31 to 41
28 to 62
Strength to Weight: Bending, points 36 to 44
24 to 41
Thermal Diffusivity, mm2/s 67
8.1
Thermal Shock Resistance, points 14 to 18
27 to 60

Alloy Composition

Aluminum (Al), % 94.2 to 97.8
0
Bismuth (Bi), % 0.4 to 0.9
0
Carbon (C), % 0
0.48 to 0.6
Chromium (Cr), % 0.040 to 0.14
13 to 15
Copper (Cu), % 0.15 to 0.4
0
Iron (Fe), % 0 to 0.7
81.4 to 86
Magnesium (Mg), % 0.8 to 1.2
0
Manganese (Mn), % 0 to 0.15
0 to 1.0
Molybdenum (Mo), % 0
0.5 to 0.8
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0.4 to 0.8
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Tin (Sn), % 0.4 to 1.0
0
Titanium (Ti), % 0 to 0.1
0
Vanadium (V), % 0
0 to 0.15
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0