MakeItFrom.com
Menu (ESC)

6360 Aluminum vs. ACI-ASTM CE30 Steel

6360 aluminum belongs to the aluminum alloys classification, while ACI-ASTM CE30 steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6360 aluminum and the bottom bar is ACI-ASTM CE30 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
200
Elongation at Break, % 9.0 to 18
11
Fatigue Strength, MPa 31 to 67
170
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 26
79
Tensile Strength: Ultimate (UTS), MPa 120 to 220
630
Tensile Strength: Yield (Proof), MPa 57 to 170
310

Thermal Properties

Latent Heat of Fusion, J/g 400
310
Maximum Temperature: Mechanical, °C 160
1100
Melting Completion (Liquidus), °C 640
1410
Melting Onset (Solidus), °C 630
1360
Specific Heat Capacity, J/kg-K 900
490
Thermal Conductivity, W/m-K 210
14
Thermal Expansion, µm/m-K 23
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 54
2.1
Electrical Conductivity: Equal Weight (Specific), % IACS 180
2.4

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
19
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.3
3.4
Embodied Energy, MJ/kg 150
49
Embodied Water, L/kg 1190
180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 14 to 19
59
Resilience: Unit (Modulus of Resilience), kJ/m3 24 to 210
240
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 13 to 23
23
Strength to Weight: Bending, points 20 to 30
21
Thermal Diffusivity, mm2/s 86
3.6
Thermal Shock Resistance, points 5.5 to 9.9
13

Alloy Composition

Aluminum (Al), % 97.8 to 99.3
0
Carbon (C), % 0
0 to 0.3
Chromium (Cr), % 0 to 0.050
26 to 30
Copper (Cu), % 0 to 0.15
0
Iron (Fe), % 0.1 to 0.3
55.1 to 66
Magnesium (Mg), % 0.25 to 0.45
0
Manganese (Mn), % 0.020 to 0.15
0 to 1.5
Nickel (Ni), % 0
8.0 to 11
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0.35 to 0.8
0 to 2.0
Sulfur (S), % 0
0 to 0.040
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0