MakeItFrom.com
Menu (ESC)

6360 Aluminum vs. ASTM B477 Au-Ni-Ag

6360 aluminum belongs to the aluminum alloys classification, while ASTM B477 Au-Ni-Ag belongs to the otherwise unclassified metals. There are 19 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6360 aluminum and the bottom bar is ASTM B477 Au-Ni-Ag.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
95
Elongation at Break, % 9.0 to 18
5.5 to 11
Poisson's Ratio 0.33
0.41
Shear Modulus, GPa 26
34
Shear Strength, MPa 76 to 130
190 to 320
Tensile Strength: Ultimate (UTS), MPa 120 to 220
310 to 550

Thermal Properties

Latent Heat of Fusion, J/g 400
80
Melting Completion (Liquidus), °C 640
1010
Melting Onset (Solidus), °C 630
930
Specific Heat Capacity, J/kg-K 900
160
Thermal Expansion, µm/m-K 23
15

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 54
14
Electrical Conductivity: Equal Weight (Specific), % IACS 180
7.5

Otherwise Unclassified Properties

Density, g/cm3 2.7
17

Common Calculations

Stiffness to Weight: Axial, points 14
3.1
Stiffness to Weight: Bending, points 50
8.9
Strength to Weight: Axial, points 13 to 23
5.0 to 9.0
Strength to Weight: Bending, points 20 to 30
6.0 to 8.8
Thermal Shock Resistance, points 5.5 to 9.9
16 to 28

Alloy Composition

Aluminum (Al), % 97.8 to 99.3
0
Chromium (Cr), % 0 to 0.050
0
Copper (Cu), % 0 to 0.15
0
Gold (Au), % 0
74.2 to 75.8
Iron (Fe), % 0.1 to 0.3
0
Magnesium (Mg), % 0.25 to 0.45
0
Manganese (Mn), % 0.020 to 0.15
0
Nickel (Ni), % 0
2.6 to 3.4
Silicon (Si), % 0.35 to 0.8
0
Silver (Ag), % 0
21.4 to 22.6
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0
0 to 0.3