MakeItFrom.com
Menu (ESC)

6360 Aluminum vs. SAE-AISI 5160 Steel

6360 aluminum belongs to the aluminum alloys classification, while SAE-AISI 5160 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6360 aluminum and the bottom bar is SAE-AISI 5160 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 9.0 to 18
12 to 18
Fatigue Strength, MPa 31 to 67
180 to 650
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 76 to 130
390 to 700
Tensile Strength: Ultimate (UTS), MPa 120 to 220
660 to 1150
Tensile Strength: Yield (Proof), MPa 57 to 170
280 to 1010

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 160
420
Melting Completion (Liquidus), °C 640
1450
Melting Onset (Solidus), °C 630
1410
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 210
43
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 54
7.2
Electrical Conductivity: Equal Weight (Specific), % IACS 180
8.3

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
2.1
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.3
1.4
Embodied Energy, MJ/kg 150
19
Embodied Water, L/kg 1190
50

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 14 to 19
73 to 160
Resilience: Unit (Modulus of Resilience), kJ/m3 24 to 210
200 to 2700
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 13 to 23
23 to 41
Strength to Weight: Bending, points 20 to 30
22 to 31
Thermal Diffusivity, mm2/s 86
12
Thermal Shock Resistance, points 5.5 to 9.9
19 to 34

Alloy Composition

Aluminum (Al), % 97.8 to 99.3
0
Carbon (C), % 0
0.56 to 0.61
Chromium (Cr), % 0 to 0.050
0.7 to 0.9
Copper (Cu), % 0 to 0.15
0
Iron (Fe), % 0.1 to 0.3
97.1 to 97.8
Magnesium (Mg), % 0.25 to 0.45
0
Manganese (Mn), % 0.020 to 0.15
0.75 to 1.0
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0.35 to 0.8
0.15 to 0.35
Sulfur (S), % 0
0 to 0.040
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0