MakeItFrom.com
Menu (ESC)

70Ag-30Ni Alloy vs. EN-MC65120 Magnesium

70Ag-30Ni alloy belongs to the otherwise unclassified metals classification, while EN-MC65120 magnesium belongs to the magnesium alloys. There are 17 material properties with values for both materials. Properties with values for just one material (14, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 70Ag-30Ni alloy and the bottom bar is EN-MC65120 magnesium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 100
45
Poisson's Ratio 0.35
0.29
Shear Modulus, GPa 39
17
Tensile Strength: Ultimate (UTS), MPa 320 to 530
160

Thermal Properties

Latent Heat of Fusion, J/g 170
330
Melting Completion (Liquidus), °C 960
590
Melting Onset (Solidus), °C 960
520
Specific Heat Capacity, J/kg-K 300
970
Thermal Expansion, µm/m-K 17
26

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 69
25
Electrical Conductivity: Equal Weight (Specific), % IACS 62
120

Otherwise Unclassified Properties

Density, g/cm3 10
1.9

Common Calculations

Stiffness to Weight: Axial, points 5.8
13
Stiffness to Weight: Bending, points 16
62
Strength to Weight: Axial, points 8.8 to 15
23
Strength to Weight: Bending, points 10 to 15
34
Thermal Shock Resistance, points 13 to 21
9.8

Alloy Composition

Copper (Cu), % 0
0 to 0.030
Iron (Fe), % 0
0 to 0.010
Magnesium (Mg), % 0
91.8 to 95.1
Manganese (Mn), % 0
0 to 0.15
Nickel (Ni), % 28.8 to 31
0 to 0.0050
Silicon (Si), % 0
0 to 0.010
Silver (Ag), % 69 to 71
0
Unspecified Rare Earths, % 0
2.5 to 4.0
Zinc (Zn), % 0
2.0 to 3.0
Zirconium (Zr), % 0
0.4 to 1.0
Residuals, % 0
0 to 0.010