MakeItFrom.com
Menu (ESC)

7010 Aluminum vs. ACI-ASTM CK20 Steel

7010 aluminum belongs to the aluminum alloys classification, while ACI-ASTM CK20 steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7010 aluminum and the bottom bar is ACI-ASTM CK20 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 3.9 to 6.8
37
Fatigue Strength, MPa 160 to 190
220
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 26
78
Tensile Strength: Ultimate (UTS), MPa 520 to 590
530
Tensile Strength: Yield (Proof), MPa 410 to 540
260

Thermal Properties

Latent Heat of Fusion, J/g 380
310
Maximum Temperature: Mechanical, °C 200
1100
Melting Completion (Liquidus), °C 630
1400
Melting Onset (Solidus), °C 480
1430
Specific Heat Capacity, J/kg-K 860
480
Thermal Conductivity, W/m-K 150
14
Thermal Expansion, µm/m-K 24
15

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 120
2.3

Otherwise Unclassified Properties

Base Metal Price, % relative 10
25
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.3
4.4
Embodied Energy, MJ/kg 150
62
Embodied Water, L/kg 1120
190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 22 to 33
160
Resilience: Unit (Modulus of Resilience), kJ/m3 1230 to 2130
170
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 45
25
Strength to Weight: Axial, points 47 to 54
19
Strength to Weight: Bending, points 47 to 52
19
Thermal Diffusivity, mm2/s 58
3.7
Thermal Shock Resistance, points 22 to 26
13

Alloy Composition

Aluminum (Al), % 87.9 to 90.6
0
Carbon (C), % 0
0 to 0.2
Chromium (Cr), % 0 to 0.050
23 to 27
Copper (Cu), % 1.5 to 2.0
0
Iron (Fe), % 0 to 0.15
46.7 to 58
Magnesium (Mg), % 2.1 to 2.6
0
Manganese (Mn), % 0 to 0.1
0 to 2.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0 to 0.050
19 to 22
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.12
0 to 2.0
Sulfur (S), % 0
0 to 0.040
Titanium (Ti), % 0 to 0.060
0
Zinc (Zn), % 5.7 to 6.7
0
Zirconium (Zr), % 0.1 to 0.16
0
Residuals, % 0 to 0.15
0