MakeItFrom.com
Menu (ESC)

7010 Aluminum vs. EN 1.5511 Steel

7010 aluminum belongs to the aluminum alloys classification, while EN 1.5511 steel belongs to the iron alloys. There are 24 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7010 aluminum and the bottom bar is EN 1.5511 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Poisson's Ratio 0.32
0.29
Shear Modulus, GPa 26
72
Tensile Strength: Ultimate (UTS), MPa 520 to 590
490 to 580

Thermal Properties

Latent Heat of Fusion, J/g 380
250
Maximum Temperature: Mechanical, °C 200
400
Melting Completion (Liquidus), °C 630
1460
Melting Onset (Solidus), °C 480
1420
Specific Heat Capacity, J/kg-K 860
470
Thermal Conductivity, W/m-K 150
51
Thermal Expansion, µm/m-K 24
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 120
8.1

Otherwise Unclassified Properties

Base Metal Price, % relative 10
1.8
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.3
1.4
Embodied Energy, MJ/kg 150
19
Embodied Water, L/kg 1120
46

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 45
24
Strength to Weight: Axial, points 47 to 54
17 to 20
Strength to Weight: Bending, points 47 to 52
18 to 20
Thermal Diffusivity, mm2/s 58
14
Thermal Shock Resistance, points 22 to 26
15 to 17

Alloy Composition

Aluminum (Al), % 87.9 to 90.6
0.020 to 0.060
Boron (B), % 0
0.00080 to 0.0050
Carbon (C), % 0
0.32 to 0.39
Chromium (Cr), % 0 to 0.050
0
Copper (Cu), % 1.5 to 2.0
0
Iron (Fe), % 0 to 0.15
98.3 to 99.159
Magnesium (Mg), % 2.1 to 2.6
0
Manganese (Mn), % 0 to 0.1
0.5 to 0.8
Nickel (Ni), % 0 to 0.050
0
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.12
0 to 0.4
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.060
0
Zinc (Zn), % 5.7 to 6.7
0
Zirconium (Zr), % 0.1 to 0.16
0
Residuals, % 0 to 0.15
0