MakeItFrom.com
Menu (ESC)

7010 Aluminum vs. SAE-AISI 81B45 Steel

7010 aluminum belongs to the aluminum alloys classification, while SAE-AISI 81B45 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7010 aluminum and the bottom bar is SAE-AISI 81B45 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 3.9 to 6.8
12 to 24
Fatigue Strength, MPa 160 to 190
250 to 350
Poisson's Ratio 0.32
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 300 to 340
340 to 400
Tensile Strength: Ultimate (UTS), MPa 520 to 590
540 to 670
Tensile Strength: Yield (Proof), MPa 410 to 540
350 to 560

Thermal Properties

Latent Heat of Fusion, J/g 380
250
Maximum Temperature: Mechanical, °C 200
410
Melting Completion (Liquidus), °C 630
1460
Melting Onset (Solidus), °C 480
1420
Specific Heat Capacity, J/kg-K 860
470
Thermal Conductivity, W/m-K 150
40
Thermal Expansion, µm/m-K 24
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
7.2
Electrical Conductivity: Equal Weight (Specific), % IACS 120
8.3

Otherwise Unclassified Properties

Base Metal Price, % relative 10
2.3
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.3
1.5
Embodied Energy, MJ/kg 150
20
Embodied Water, L/kg 1120
49

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 22 to 33
77 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 1230 to 2130
320 to 840
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 45
24
Strength to Weight: Axial, points 47 to 54
19 to 24
Strength to Weight: Bending, points 47 to 52
19 to 22
Thermal Diffusivity, mm2/s 58
11
Thermal Shock Resistance, points 22 to 26
17 to 21

Alloy Composition

Aluminum (Al), % 87.9 to 90.6
0
Boron (B), % 0
0.00050 to 0.0030
Carbon (C), % 0
0.43 to 0.48
Chromium (Cr), % 0 to 0.050
0.35 to 0.55
Copper (Cu), % 1.5 to 2.0
0
Iron (Fe), % 0 to 0.15
97 to 98
Magnesium (Mg), % 2.1 to 2.6
0
Manganese (Mn), % 0 to 0.1
0.75 to 1.0
Molybdenum (Mo), % 0
0.080 to 0.15
Nickel (Ni), % 0 to 0.050
0.2 to 0.4
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0 to 0.12
0.15 to 0.35
Sulfur (S), % 0
0 to 0.040
Titanium (Ti), % 0 to 0.060
0
Zinc (Zn), % 5.7 to 6.7
0
Zirconium (Zr), % 0.1 to 0.16
0
Residuals, % 0 to 0.15
0