MakeItFrom.com
Menu (ESC)

7010 Aluminum vs. C15500 Copper

7010 aluminum belongs to the aluminum alloys classification, while C15500 copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7010 aluminum and the bottom bar is C15500 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
120
Elongation at Break, % 3.9 to 6.8
3.0 to 37
Poisson's Ratio 0.32
0.34
Shear Modulus, GPa 26
43
Shear Strength, MPa 300 to 340
190 to 320
Tensile Strength: Ultimate (UTS), MPa 520 to 590
280 to 550
Tensile Strength: Yield (Proof), MPa 410 to 540
130 to 530

Thermal Properties

Latent Heat of Fusion, J/g 380
210
Maximum Temperature: Mechanical, °C 200
200
Melting Completion (Liquidus), °C 630
1080
Melting Onset (Solidus), °C 480
1080
Specific Heat Capacity, J/kg-K 860
390
Thermal Conductivity, W/m-K 150
350
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
90
Electrical Conductivity: Equal Weight (Specific), % IACS 120
91

Otherwise Unclassified Properties

Base Metal Price, % relative 10
33
Density, g/cm3 3.0
8.9
Embodied Carbon, kg CO2/kg material 8.3
2.7
Embodied Energy, MJ/kg 150
42
Embodied Water, L/kg 1120
360

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 22 to 33
15 to 84
Resilience: Unit (Modulus of Resilience), kJ/m3 1230 to 2130
72 to 1210
Stiffness to Weight: Axial, points 13
7.2
Stiffness to Weight: Bending, points 45
18
Strength to Weight: Axial, points 47 to 54
8.6 to 17
Strength to Weight: Bending, points 47 to 52
11 to 17
Thermal Diffusivity, mm2/s 58
100
Thermal Shock Resistance, points 22 to 26
9.8 to 20

Alloy Composition

Aluminum (Al), % 87.9 to 90.6
0
Chromium (Cr), % 0 to 0.050
0
Copper (Cu), % 1.5 to 2.0
99.75 to 99.853
Iron (Fe), % 0 to 0.15
0
Magnesium (Mg), % 2.1 to 2.6
0.080 to 0.13
Manganese (Mn), % 0 to 0.1
0
Nickel (Ni), % 0 to 0.050
0
Phosphorus (P), % 0
0.040 to 0.080
Silicon (Si), % 0 to 0.12
0
Silver (Ag), % 0
0.027 to 0.1
Titanium (Ti), % 0 to 0.060
0
Zinc (Zn), % 5.7 to 6.7
0
Zirconium (Zr), % 0.1 to 0.16
0
Residuals, % 0
0 to 0.2