MakeItFrom.com
Menu (ESC)

7010 Aluminum vs. S82441 Stainless Steel

7010 aluminum belongs to the aluminum alloys classification, while S82441 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7010 aluminum and the bottom bar is S82441 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 3.9 to 6.8
28
Fatigue Strength, MPa 160 to 190
400
Poisson's Ratio 0.32
0.27
Shear Modulus, GPa 26
79
Shear Strength, MPa 300 to 340
490
Tensile Strength: Ultimate (UTS), MPa 520 to 590
760
Tensile Strength: Yield (Proof), MPa 410 to 540
550

Thermal Properties

Latent Heat of Fusion, J/g 380
290
Maximum Temperature: Mechanical, °C 200
1090
Melting Completion (Liquidus), °C 630
1430
Melting Onset (Solidus), °C 480
1380
Specific Heat Capacity, J/kg-K 860
480
Thermal Conductivity, W/m-K 150
15
Thermal Expansion, µm/m-K 24
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
2.2
Electrical Conductivity: Equal Weight (Specific), % IACS 120
2.5

Otherwise Unclassified Properties

Base Metal Price, % relative 10
16
Density, g/cm3 3.0
7.7
Embodied Carbon, kg CO2/kg material 8.3
3.2
Embodied Energy, MJ/kg 150
45
Embodied Water, L/kg 1120
170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 22 to 33
190
Resilience: Unit (Modulus of Resilience), kJ/m3 1230 to 2130
740
Stiffness to Weight: Axial, points 13
15
Stiffness to Weight: Bending, points 45
25
Strength to Weight: Axial, points 47 to 54
27
Strength to Weight: Bending, points 47 to 52
24
Thermal Diffusivity, mm2/s 58
3.9
Thermal Shock Resistance, points 22 to 26
21

Alloy Composition

Aluminum (Al), % 87.9 to 90.6
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0 to 0.050
23 to 25
Copper (Cu), % 1.5 to 2.0
0.1 to 0.8
Iron (Fe), % 0 to 0.15
62.6 to 70.2
Magnesium (Mg), % 2.1 to 2.6
0
Manganese (Mn), % 0 to 0.1
2.5 to 4.0
Molybdenum (Mo), % 0
1.0 to 2.0
Nickel (Ni), % 0 to 0.050
3.0 to 4.5
Nitrogen (N), % 0
0.2 to 0.3
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0 to 0.12
0 to 0.7
Sulfur (S), % 0
0 to 0.0050
Titanium (Ti), % 0 to 0.060
0
Zinc (Zn), % 5.7 to 6.7
0
Zirconium (Zr), % 0.1 to 0.16
0
Residuals, % 0 to 0.15
0