MakeItFrom.com
Menu (ESC)

7020 Aluminum vs. EN 1.0117 Steel

7020 aluminum belongs to the aluminum alloys classification, while EN 1.0117 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7020 aluminum and the bottom bar is EN 1.0117 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 45 to 100
120
Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 8.4 to 14
25
Fatigue Strength, MPa 110 to 130
160
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 110 to 230
270
Tensile Strength: Ultimate (UTS), MPa 190 to 390
430
Tensile Strength: Yield (Proof), MPa 120 to 310
220

Thermal Properties

Latent Heat of Fusion, J/g 380
250
Maximum Temperature: Mechanical, °C 210
400
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 610
1420
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 150
52
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 39
7.2
Electrical Conductivity: Equal Weight (Specific), % IACS 120
8.2

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
1.9
Density, g/cm3 2.9
7.9
Embodied Carbon, kg CO2/kg material 8.3
1.4
Embodied Energy, MJ/kg 150
18
Embodied Water, L/kg 1150
47

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 23 to 46
88
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 690
130
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 47
24
Strength to Weight: Axial, points 18 to 37
15
Strength to Weight: Bending, points 25 to 41
16
Thermal Diffusivity, mm2/s 59
14
Thermal Shock Resistance, points 8.3 to 17
13

Alloy Composition

Aluminum (Al), % 91.2 to 94.8
0
Carbon (C), % 0
0 to 0.19
Chromium (Cr), % 0.1 to 0.35
0
Copper (Cu), % 0 to 0.2
0 to 0.6
Iron (Fe), % 0 to 0.4
97.6 to 100
Magnesium (Mg), % 1.0 to 1.4
0
Manganese (Mn), % 0.050 to 0.5
0 to 1.5
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0 to 0.35
0
Sulfur (S), % 0
0 to 0.035
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 4.0 to 5.0
0
Zirconium (Zr), % 0.080 to 0.25
0
Residuals, % 0 to 0.15
0