MakeItFrom.com
Menu (ESC)

7049 Aluminum vs. CC766S Brass

7049 aluminum belongs to the aluminum alloys classification, while CC766S brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7049 aluminum and the bottom bar is CC766S brass.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 140
120
Elastic (Young's, Tensile) Modulus, GPa 70
110
Elongation at Break, % 6.2 to 7.0
28
Poisson's Ratio 0.32
0.31
Shear Modulus, GPa 27
40
Tensile Strength: Ultimate (UTS), MPa 510 to 530
500
Tensile Strength: Yield (Proof), MPa 420 to 450
190

Thermal Properties

Latent Heat of Fusion, J/g 370
180
Maximum Temperature: Mechanical, °C 180
130
Melting Completion (Liquidus), °C 640
840
Melting Onset (Solidus), °C 480
800
Specific Heat Capacity, J/kg-K 860
390
Thermal Conductivity, W/m-K 130
89
Thermal Expansion, µm/m-K 23
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 36
32
Electrical Conductivity: Equal Weight (Specific), % IACS 110
36

Otherwise Unclassified Properties

Base Metal Price, % relative 10
24
Density, g/cm3 3.1
8.0
Embodied Carbon, kg CO2/kg material 8.1
2.8
Embodied Energy, MJ/kg 140
48
Embodied Water, L/kg 1110
330

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 31 to 34
110
Resilience: Unit (Modulus of Resilience), kJ/m3 1270 to 1440
180
Stiffness to Weight: Axial, points 13
7.3
Stiffness to Weight: Bending, points 45
20
Strength to Weight: Axial, points 46 to 47
17
Strength to Weight: Bending, points 46 to 47
18
Thermal Diffusivity, mm2/s 51
28
Thermal Shock Resistance, points 22 to 23
17

Alloy Composition

Aluminum (Al), % 85.7 to 89.5
0.3 to 1.8
Antimony (Sb), % 0
0 to 0.1
Chromium (Cr), % 0.1 to 0.22
0
Copper (Cu), % 1.2 to 1.9
58 to 64
Iron (Fe), % 0 to 0.35
0 to 0.5
Lead (Pb), % 0
0 to 0.5
Magnesium (Mg), % 2.0 to 2.9
0
Manganese (Mn), % 0 to 0.2
0 to 0.5
Nickel (Ni), % 0
0 to 2.0
Silicon (Si), % 0 to 0.25
0 to 0.6
Tin (Sn), % 0
0 to 0.5
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 7.2 to 8.2
29.5 to 41.7
Residuals, % 0 to 0.15
0