MakeItFrom.com
Menu (ESC)

7178 Aluminum vs. EN 1.4313 Stainless Steel

7178 aluminum belongs to the aluminum alloys classification, while EN 1.4313 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7178 aluminum and the bottom bar is EN 1.4313 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 4.5 to 12
12 to 17
Fatigue Strength, MPa 120 to 210
340 to 510
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 27
76
Shear Strength, MPa 140 to 380
460 to 600
Tensile Strength: Ultimate (UTS), MPa 240 to 640
750 to 1000
Tensile Strength: Yield (Proof), MPa 120 to 560
580 to 910

Thermal Properties

Latent Heat of Fusion, J/g 370
280
Maximum Temperature: Mechanical, °C 180
780
Melting Completion (Liquidus), °C 630
1450
Melting Onset (Solidus), °C 480
1400
Specific Heat Capacity, J/kg-K 860
480
Thermal Conductivity, W/m-K 130
25
Thermal Expansion, µm/m-K 23
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 31
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 91
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 10
10
Density, g/cm3 3.1
7.8
Embodied Carbon, kg CO2/kg material 8.2
2.4
Embodied Energy, MJ/kg 150
34
Embodied Water, L/kg 1110
110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 24 to 52
110 to 150
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 2220
870 to 2100
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 45
25
Strength to Weight: Axial, points 21 to 58
27 to 36
Strength to Weight: Bending, points 28 to 54
23 to 28
Thermal Diffusivity, mm2/s 47
6.7
Thermal Shock Resistance, points 10 to 28
27 to 36

Alloy Composition

Aluminum (Al), % 85.4 to 89.5
0
Carbon (C), % 0
0 to 0.050
Chromium (Cr), % 0.18 to 0.28
12 to 14
Copper (Cu), % 1.6 to 2.4
0
Iron (Fe), % 0 to 0.5
78.5 to 84.2
Magnesium (Mg), % 2.4 to 3.1
0
Manganese (Mn), % 0 to 0.3
0 to 1.5
Molybdenum (Mo), % 0
0.3 to 0.7
Nickel (Ni), % 0
3.5 to 4.5
Nitrogen (N), % 0
0 to 0.020
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.4
0 to 0.7
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 6.3 to 7.3
0
Residuals, % 0 to 0.15
0

Comparable Variants