MakeItFrom.com
Menu (ESC)

7178 Aluminum vs. EN 1.4825 Stainless Steel

7178 aluminum belongs to the aluminum alloys classification, while EN 1.4825 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 7178 aluminum and the bottom bar is EN 1.4825 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 4.5 to 12
17
Fatigue Strength, MPa 120 to 210
160
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 27
77
Tensile Strength: Ultimate (UTS), MPa 240 to 640
510
Tensile Strength: Yield (Proof), MPa 120 to 560
260

Thermal Properties

Latent Heat of Fusion, J/g 370
300
Maximum Temperature: Mechanical, °C 180
900
Melting Completion (Liquidus), °C 630
1410
Melting Onset (Solidus), °C 480
1370
Specific Heat Capacity, J/kg-K 860
480
Thermal Conductivity, W/m-K 130
15
Thermal Expansion, µm/m-K 23
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 31
2.3
Electrical Conductivity: Equal Weight (Specific), % IACS 91
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 10
15
Density, g/cm3 3.1
7.7
Embodied Carbon, kg CO2/kg material 8.2
3.1
Embodied Energy, MJ/kg 150
43
Embodied Water, L/kg 1110
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 24 to 52
72
Resilience: Unit (Modulus of Resilience), kJ/m3 110 to 2220
170
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 45
25
Strength to Weight: Axial, points 21 to 58
18
Strength to Weight: Bending, points 28 to 54
18
Thermal Diffusivity, mm2/s 47
4.0
Thermal Shock Resistance, points 10 to 28
12

Alloy Composition

Aluminum (Al), % 85.4 to 89.5
0
Carbon (C), % 0
0.15 to 0.35
Chromium (Cr), % 0.18 to 0.28
17 to 19
Copper (Cu), % 1.6 to 2.4
0
Iron (Fe), % 0 to 0.5
65.6 to 74.4
Magnesium (Mg), % 2.4 to 3.1
0
Manganese (Mn), % 0 to 0.3
0 to 2.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0
8.0 to 10
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.4
0.5 to 2.5
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 6.3 to 7.3
0
Residuals, % 0 to 0.15
0