8011A Aluminum vs. AISI 304N Stainless Steel
8011A aluminum belongs to the aluminum alloys classification, while AISI 304N stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 8011A aluminum and the bottom bar is AISI 304N stainless steel.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 25 to 50 | |
190 to 360 |
Elastic (Young's, Tensile) Modulus, GPa | 69 | |
200 |
Elongation at Break, % | 1.7 to 28 | |
9.1 to 45 |
Fatigue Strength, MPa | 33 to 76 | |
220 to 440 |
Poisson's Ratio | 0.33 | |
0.28 |
Shear Modulus, GPa | 26 | |
77 |
Tensile Strength: Ultimate (UTS), MPa | 100 to 180 | |
620 to 1180 |
Tensile Strength: Yield (Proof), MPa | 34 to 170 | |
270 to 850 |
Thermal Properties
Latent Heat of Fusion, J/g | 400 | |
290 |
Maximum Temperature: Mechanical, °C | 170 | |
960 |
Melting Completion (Liquidus), °C | 650 | |
1420 |
Melting Onset (Solidus), °C | 630 | |
1380 |
Specific Heat Capacity, J/kg-K | 900 | |
480 |
Thermal Conductivity, W/m-K | 210 | |
16 |
Thermal Expansion, µm/m-K | 23 | |
16 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 56 | |
2.4 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 180 | |
2.7 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 9.0 | |
15 |
Density, g/cm3 | 2.7 | |
7.8 |
Embodied Carbon, kg CO2/kg material | 8.2 | |
3.0 |
Embodied Energy, MJ/kg | 150 | |
43 |
Embodied Water, L/kg | 1180 | |
150 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 3.0 to 22 | |
98 to 280 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 8.2 to 200 | |
180 to 1830 |
Stiffness to Weight: Axial, points | 14 | |
14 |
Stiffness to Weight: Bending, points | 50 | |
25 |
Strength to Weight: Axial, points | 11 to 18 | |
22 to 42 |
Strength to Weight: Bending, points | 18 to 26 | |
21 to 32 |
Thermal Diffusivity, mm2/s | 86 | |
4.2 |
Thermal Shock Resistance, points | 4.6 to 8.1 | |
14 to 26 |
Alloy Composition
Aluminum (Al), % | 97.5 to 99.1 | |
0 |
Carbon (C), % | 0 | |
0 to 0.080 |
Chromium (Cr), % | 0 to 0.1 | |
18 to 20 |
Copper (Cu), % | 0 to 0.1 | |
0 |
Iron (Fe), % | 0.5 to 1.0 | |
66.4 to 73.9 |
Magnesium (Mg), % | 0 to 0.1 | |
0 |
Manganese (Mn), % | 0 to 0.1 | |
0 to 2.0 |
Nickel (Ni), % | 0 | |
8.0 to 10.5 |
Nitrogen (N), % | 0 | |
0.1 to 0.16 |
Phosphorus (P), % | 0 | |
0 to 0.045 |
Silicon (Si), % | 0.4 to 0.8 | |
0 to 0.75 |
Sulfur (S), % | 0 | |
0 to 0.030 |
Titanium (Ti), % | 0 to 0.050 | |
0 |
Zinc (Zn), % | 0 to 0.1 | |
0 |
Residuals, % | 0 to 0.15 | |
0 |