MakeItFrom.com
Menu (ESC)

8011A Aluminum vs. SAE-AISI A10 Steel

8011A aluminum belongs to the aluminum alloys classification, while SAE-AISI A10 steel belongs to the iron alloys. There are 23 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 8011A aluminum and the bottom bar is SAE-AISI A10 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
72
Tensile Strength: Ultimate (UTS), MPa 100 to 180
810 to 2040

Thermal Properties

Latent Heat of Fusion, J/g 400
270
Melting Completion (Liquidus), °C 650
1440
Melting Onset (Solidus), °C 630
1400
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 210
40
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 56
7.8
Electrical Conductivity: Equal Weight (Specific), % IACS 180
9.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.0
5.0
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.2
2.1
Embodied Energy, MJ/kg 150
27
Embodied Water, L/kg 1180
56

Common Calculations

Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 11 to 18
29 to 73
Strength to Weight: Bending, points 18 to 26
25 to 46
Thermal Diffusivity, mm2/s 86
11
Thermal Shock Resistance, points 4.6 to 8.1
27 to 68

Alloy Composition

Aluminum (Al), % 97.5 to 99.1
0
Carbon (C), % 0
1.3 to 1.5
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.1
0 to 0.25
Iron (Fe), % 0.5 to 1.0
90.8 to 93.4
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.1
1.6 to 2.1
Molybdenum (Mo), % 0
1.3 to 1.8
Nickel (Ni), % 0
1.6 to 2.1
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0.4 to 0.8
1.0 to 1.5
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.050
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0

Comparable Variants