MakeItFrom.com
Menu (ESC)

8011A Aluminum vs. C49300 Brass

8011A aluminum belongs to the aluminum alloys classification, while C49300 brass belongs to the copper alloys. There are 28 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 8011A aluminum and the bottom bar is C49300 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
100
Elongation at Break, % 1.7 to 28
4.5 to 20
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
40
Tensile Strength: Ultimate (UTS), MPa 100 to 180
430 to 520
Tensile Strength: Yield (Proof), MPa 34 to 170
210 to 410

Thermal Properties

Latent Heat of Fusion, J/g 400
170
Maximum Temperature: Mechanical, °C 170
120
Melting Completion (Liquidus), °C 650
880
Melting Onset (Solidus), °C 630
840
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 210
88
Thermal Expansion, µm/m-K 23
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 56
15
Electrical Conductivity: Equal Weight (Specific), % IACS 180
17

Otherwise Unclassified Properties

Base Metal Price, % relative 9.0
26
Density, g/cm3 2.7
8.0
Embodied Carbon, kg CO2/kg material 8.2
3.0
Embodied Energy, MJ/kg 150
50
Embodied Water, L/kg 1180
370

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 3.0 to 22
21 to 71
Resilience: Unit (Modulus of Resilience), kJ/m3 8.2 to 200
220 to 800
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 11 to 18
15 to 18
Strength to Weight: Bending, points 18 to 26
16 to 18
Thermal Diffusivity, mm2/s 86
29
Thermal Shock Resistance, points 4.6 to 8.1
14 to 18

Alloy Composition

Aluminum (Al), % 97.5 to 99.1
0 to 0.5
Antimony (Sb), % 0
0 to 0.5
Bismuth (Bi), % 0
0.5 to 2.0
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.1
58 to 62
Iron (Fe), % 0.5 to 1.0
0 to 0.1
Lead (Pb), % 0
0 to 0.010
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.1
0 to 0.030
Nickel (Ni), % 0
0 to 1.5
Phosphorus (P), % 0
0 to 0.2
Selenium (Se), % 0
0 to 0.2
Silicon (Si), % 0.4 to 0.8
0 to 0.1
Tin (Sn), % 0
1.0 to 1.8
Titanium (Ti), % 0 to 0.050
0
Zinc (Zn), % 0 to 0.1
30.6 to 40.5
Residuals, % 0
0 to 0.5