85-platinum 15-iridium vs. C27000 Brass
85-platinum 15-iridium belongs to the otherwise unclassified metals classification, while C27000 brass belongs to the copper alloys. There are 17 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 85-platinum 15-iridium and the bottom bar is C27000 brass.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 220 | |
110 |
Poisson's Ratio | 0.38 | |
0.31 |
Shear Modulus, GPa | 81 | |
40 |
Tensile Strength: Ultimate (UTS), MPa | 560 to 730 | |
370 to 650 |
Thermal Properties
Latent Heat of Fusion, J/g | 110 | |
180 |
Melting Completion (Liquidus), °C | 1820 | |
930 |
Melting Onset (Solidus), °C | 1790 | |
900 |
Specific Heat Capacity, J/kg-K | 130 | |
390 |
Thermal Expansion, µm/m-K | 8.4 | |
20 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 6.2 | |
27 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 2.6 | |
30 |
Otherwise Unclassified Properties
Density, g/cm3 | 22 | |
8.1 |
Common Calculations
Stiffness to Weight: Axial, points | 5.7 | |
7.2 |
Stiffness to Weight: Bending, points | 9.3 | |
19 |
Strength to Weight: Axial, points | 7.1 to 9.3 | |
13 to 22 |
Strength to Weight: Bending, points | 6.9 to 8.3 | |
14 to 21 |
Thermal Shock Resistance, points | 21 to 28 | |
12 to 22 |
Alloy Composition
Copper (Cu), % | 0 | |
63 to 68.5 |
Iridium (Ir), % | 14.5 to 15.5 | |
0 |
Iron (Fe), % | 0 | |
0 to 0.1 |
Lead (Pb), % | 0 | |
0 to 0.070 |
Platinum (Pt), % | 84.3 to 85.5 | |
0 |
Zinc (Zn), % | 0 | |
31 to 37 |
Residuals, % | 0 | |
0 to 0.3 |