MakeItFrom.com
Menu (ESC)

85-silver 15-nickel vs. 7049A Aluminum

85-silver 15-nickel belongs to the otherwise unclassified metals classification, while 7049A aluminum belongs to the aluminum alloys. There are 17 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 85-silver 15-nickel and the bottom bar is 7049A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 88
71
Poisson's Ratio 0.36
0.32
Shear Modulus, GPa 32
27
Tensile Strength: Ultimate (UTS), MPa 260 to 470
580 to 590

Thermal Properties

Latent Heat of Fusion, J/g 140
370
Melting Completion (Liquidus), °C 870
640
Melting Onset (Solidus), °C 960
430
Specific Heat Capacity, J/kg-K 270
850
Thermal Expansion, µm/m-K 18
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 86
40
Electrical Conductivity: Equal Weight (Specific), % IACS 75
120

Otherwise Unclassified Properties

Density, g/cm3 10
3.1

Common Calculations

Stiffness to Weight: Axial, points 4.8
13
Stiffness to Weight: Bending, points 14
44
Strength to Weight: Axial, points 7.1 to 13
52 to 53
Strength to Weight: Bending, points 8.9 to 13
50 to 51
Thermal Shock Resistance, points 12 to 21
25

Alloy Composition

Aluminum (Al), % 0
84.6 to 89.5
Chromium (Cr), % 0
0.050 to 0.25
Copper (Cu), % 0
1.2 to 1.9
Iron (Fe), % 0
0 to 0.5
Magnesium (Mg), % 0
2.1 to 3.1
Manganese (Mn), % 0
0 to 0.5
Nickel (Ni), % 13.8 to 16
0
Silicon (Si), % 0
0 to 0.4
Silver (Ag), % 84 to 86
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
7.2 to 8.4
Zirconium (Zr), % 0
0 to 0.25
Residuals, % 0
0 to 0.15