MakeItFrom.com
Menu (ESC)

85-silver 15-nickel vs. ISO-WD21150 Magnesium

85-silver 15-nickel belongs to the otherwise unclassified metals classification, while ISO-WD21150 magnesium belongs to the magnesium alloys. There are 17 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 85-silver 15-nickel and the bottom bar is ISO-WD21150 magnesium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 88
45
Poisson's Ratio 0.36
0.29
Shear Modulus, GPa 32
17
Tensile Strength: Ultimate (UTS), MPa 260 to 470
240 to 290

Thermal Properties

Latent Heat of Fusion, J/g 140
350
Melting Completion (Liquidus), °C 870
600
Melting Onset (Solidus), °C 960
550
Specific Heat Capacity, J/kg-K 270
990
Thermal Expansion, µm/m-K 18
27

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 86
19
Electrical Conductivity: Equal Weight (Specific), % IACS 75
100

Otherwise Unclassified Properties

Density, g/cm3 10
1.7

Common Calculations

Stiffness to Weight: Axial, points 4.8
15
Stiffness to Weight: Bending, points 14
70
Strength to Weight: Axial, points 7.1 to 13
40 to 48
Strength to Weight: Bending, points 8.9 to 13
52 to 58
Thermal Shock Resistance, points 12 to 21
15 to 17

Alloy Composition

Aluminum (Al), % 0
2.4 to 3.6
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 0
0 to 0.0050
Magnesium (Mg), % 0
94 to 97
Manganese (Mn), % 0
0.15 to 0.4
Nickel (Ni), % 13.8 to 16
0 to 0.0050
Silicon (Si), % 0
0 to 0.1
Silver (Ag), % 84 to 86
0
Zinc (Zn), % 0
0.5 to 1.5
Residuals, % 0
0 to 0.3

Comparable Variants