90-platinum 10-iridium vs. Austenitic Nodular Cast Iron
90-platinum 10-iridium belongs to the otherwise unclassified metals classification, while austenitic nodular cast iron belongs to the iron alloys. There are 14 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 90-platinum 10-iridium and the bottom bar is austenitic nodular cast iron.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 200 | |
| 180 to 190 |
| Elongation at Break, % | 5.5 to 34 | |
| 6.8 to 34 |
| Poisson's Ratio | 0.38 | |
| 0.29 to 0.3 |
| Shear Modulus, GPa | 74 | |
| 70 to 72 |
| Tensile Strength: Ultimate (UTS), MPa | 330 to 550 | |
| 430 to 500 |
Thermal Properties
| Latent Heat of Fusion, J/g | 100 | |
| 280 to 350 |
| Specific Heat Capacity, J/kg-K | 130 | |
| 470 to 490 |
| Thermal Expansion, µm/m-K | 8.6 | |
| 13 to 14 |
Otherwise Unclassified Properties
| Density, g/cm3 | 22 | |
| 7.7 to 8.0 |
Common Calculations
| Stiffness to Weight: Axial, points | 5.3 | |
| 13 |
| Stiffness to Weight: Bending, points | 9.1 | |
| 24 to 25 |
| Strength to Weight: Axial, points | 4.2 to 7.1 | |
| 15 to 18 |
| Strength to Weight: Bending, points | 4.9 to 6.9 | |
| 16 to 18 |
| Thermal Shock Resistance, points | 13 to 22 | |
| 12 to 15 |