90-platinum 10-iridium vs. EN 1.5408 Steel
90-platinum 10-iridium belongs to the otherwise unclassified metals classification, while EN 1.5408 steel belongs to the iron alloys. There are 13 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 90-platinum 10-iridium and the bottom bar is EN 1.5408 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 200 | |
190 |
Poisson's Ratio | 0.38 | |
0.29 |
Shear Modulus, GPa | 74 | |
73 |
Tensile Strength: Ultimate (UTS), MPa | 330 to 550 | |
460 to 1620 |
Thermal Properties
Latent Heat of Fusion, J/g | 100 | |
250 |
Specific Heat Capacity, J/kg-K | 130 | |
470 |
Thermal Expansion, µm/m-K | 8.6 | |
13 |
Otherwise Unclassified Properties
Density, g/cm3 | 22 | |
7.8 |
Common Calculations
Stiffness to Weight: Axial, points | 5.3 | |
13 |
Stiffness to Weight: Bending, points | 9.1 | |
24 |
Strength to Weight: Axial, points | 4.2 to 7.1 | |
16 to 57 |
Strength to Weight: Bending, points | 4.9 to 6.9 | |
17 to 39 |
Thermal Shock Resistance, points | 13 to 22 | |
13 to 48 |
Alloy Composition
Boron (B), % | 0 | |
0.00080 to 0.0050 |
Carbon (C), % | 0 | |
0.28 to 0.32 |
Chromium (Cr), % | 0 | |
0 to 0.3 |
Copper (Cu), % | 0 | |
0 to 0.25 |
Iridium (Ir), % | 9.5 to 10.5 | |
0 |
Iron (Fe), % | 0 | |
97.7 to 98.8 |
Manganese (Mn), % | 0 | |
0.8 to 1.0 |
Molybdenum (Mo), % | 0 | |
0.080 to 0.12 |
Phosphorus (P), % | 0 | |
0 to 0.025 |
Platinum (Pt), % | 89.3 to 90.5 | |
0 |
Silicon (Si), % | 0 | |
0 to 0.3 |
Sulfur (S), % | 0 | |
0 to 0.025 |
Residuals, % | 0 to 0.2 | |
0 |