MakeItFrom.com
Menu (ESC)

ACI-ASTM CA15M Steel vs. 5657 Aluminum

ACI-ASTM CA15M steel belongs to the iron alloys classification, while 5657 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ACI-ASTM CA15M steel and the bottom bar is 5657 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 210
40 to 50
Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 20
6.6 to 15
Fatigue Strength, MPa 330
74 to 88
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
26
Tensile Strength: Ultimate (UTS), MPa 690
150 to 200
Tensile Strength: Yield (Proof), MPa 510
140 to 170

Thermal Properties

Latent Heat of Fusion, J/g 270
400
Maximum Temperature: Mechanical, °C 760
180
Melting Completion (Liquidus), °C 1450
660
Melting Onset (Solidus), °C 1410
640
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 27
210
Thermal Expansion, µm/m-K 10
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 3.0
54
Electrical Conductivity: Equal Weight (Specific), % IACS 3.5
180

Otherwise Unclassified Properties

Base Metal Price, % relative 7.5
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 2.1
8.4
Embodied Energy, MJ/kg 29
160
Embodied Water, L/kg 100
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 130
9.7 to 27
Resilience: Unit (Modulus of Resilience), kJ/m3 670
140 to 200
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 25
15 to 20
Strength to Weight: Bending, points 22
23 to 28
Thermal Diffusivity, mm2/s 7.2
84
Thermal Shock Resistance, points 25
6.7 to 8.6

Alloy Composition

Aluminum (Al), % 0
98.5 to 99.4
Carbon (C), % 0 to 0.15
0
Chromium (Cr), % 11.5 to 14
0
Copper (Cu), % 0
0 to 0.1
Gallium (Ga), % 0
0 to 0.030
Iron (Fe), % 82.1 to 88.4
0 to 0.1
Magnesium (Mg), % 0
0.6 to 1.0
Manganese (Mn), % 0 to 1.0
0 to 0.030
Molybdenum (Mo), % 0.15 to 1.0
0
Nickel (Ni), % 0 to 1.0
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 0.65
0 to 0.080
Sulfur (S), % 0 to 0.040
0
Vanadium (V), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.050
Residuals, % 0
0 to 0.050