MakeItFrom.com
Menu (ESC)

ACI-ASTM CA15M Steel vs. 713.0 Aluminum

ACI-ASTM CA15M steel belongs to the iron alloys classification, while 713.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ACI-ASTM CA15M steel and the bottom bar is 713.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 210
74 to 75
Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 20
3.9 to 4.3
Fatigue Strength, MPa 330
63 to 120
Poisson's Ratio 0.28
0.32
Shear Modulus, GPa 76
27
Tensile Strength: Ultimate (UTS), MPa 690
240 to 260
Tensile Strength: Yield (Proof), MPa 510
170

Thermal Properties

Latent Heat of Fusion, J/g 270
370
Maximum Temperature: Mechanical, °C 760
180
Melting Completion (Liquidus), °C 1450
630
Melting Onset (Solidus), °C 1410
610
Specific Heat Capacity, J/kg-K 480
860
Thermal Conductivity, W/m-K 27
150
Thermal Expansion, µm/m-K 10
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 3.0
35
Electrical Conductivity: Equal Weight (Specific), % IACS 3.5
100

Otherwise Unclassified Properties

Base Metal Price, % relative 7.5
9.5
Density, g/cm3 7.8
3.1
Embodied Carbon, kg CO2/kg material 2.1
7.8
Embodied Energy, MJ/kg 29
150
Embodied Water, L/kg 100
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 130
8.7 to 9.9
Resilience: Unit (Modulus of Resilience), kJ/m3 670
210 to 220
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
45
Strength to Weight: Axial, points 25
22 to 23
Strength to Weight: Bending, points 22
28 to 29
Thermal Diffusivity, mm2/s 7.2
57
Thermal Shock Resistance, points 25
10 to 11

Alloy Composition

Aluminum (Al), % 0
87.6 to 92.4
Carbon (C), % 0 to 0.15
0
Chromium (Cr), % 11.5 to 14
0 to 0.35
Copper (Cu), % 0
0.4 to 1.0
Iron (Fe), % 82.1 to 88.4
0 to 1.1
Magnesium (Mg), % 0
0.2 to 0.5
Manganese (Mn), % 0 to 1.0
0 to 0.6
Molybdenum (Mo), % 0.15 to 1.0
0
Nickel (Ni), % 0 to 1.0
0 to 0.15
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 0.65
0 to 0.25
Sulfur (S), % 0 to 0.040
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
7.0 to 8.0
Residuals, % 0
0 to 0.25