MakeItFrom.com
Menu (ESC)

ACI-ASTM CA6N Steel vs. 1050A Aluminum

ACI-ASTM CA6N steel belongs to the iron alloys classification, while 1050A aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ACI-ASTM CA6N steel and the bottom bar is 1050A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 17
1.1 to 33
Fatigue Strength, MPa 640
22 to 55
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 75
26
Tensile Strength: Ultimate (UTS), MPa 1080
68 to 170
Tensile Strength: Yield (Proof), MPa 1060
22 to 150

Thermal Properties

Latent Heat of Fusion, J/g 280
400
Maximum Temperature: Mechanical, °C 740
170
Melting Completion (Liquidus), °C 1440
660
Melting Onset (Solidus), °C 1400
650
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 23
230
Thermal Expansion, µm/m-K 9.9
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.6
59
Electrical Conductivity: Equal Weight (Specific), % IACS 3.0
200

Otherwise Unclassified Properties

Base Metal Price, % relative 11
9.0
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 2.5
8.2
Embodied Energy, MJ/kg 35
150
Embodied Water, L/kg 110
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
1.9 to 19
Resilience: Unit (Modulus of Resilience), kJ/m3 2900
3.7 to 160
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 38
6.9 to 18
Strength to Weight: Bending, points 30
14 to 25
Thermal Diffusivity, mm2/s 6.1
94
Thermal Shock Resistance, points 40
3.0 to 7.6

Alloy Composition

Aluminum (Al), % 0
99.5 to 100
Carbon (C), % 0 to 0.060
0
Chromium (Cr), % 10.5 to 12.5
0
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 77.9 to 83.5
0 to 0.4
Magnesium (Mg), % 0
0 to 0.050
Manganese (Mn), % 0 to 0.5
0 to 0.050
Nickel (Ni), % 6.0 to 8.0
0
Phosphorus (P), % 0 to 0.020
0
Silicon (Si), % 0 to 1.0
0 to 0.25
Sulfur (S), % 0 to 0.020
0
Titanium (Ti), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.070