MakeItFrom.com
Menu (ESC)

ACI-ASTM CD3MCuN Steel vs. 2014A Aluminum

ACI-ASTM CD3MCuN steel belongs to the iron alloys classification, while 2014A aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ACI-ASTM CD3MCuN steel and the bottom bar is 2014A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
72
Elongation at Break, % 29
6.2 to 16
Fatigue Strength, MPa 370
93 to 150
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 80
27
Tensile Strength: Ultimate (UTS), MPa 790
210 to 490
Tensile Strength: Yield (Proof), MPa 500
110 to 430

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1100
210
Melting Completion (Liquidus), °C 1440
640
Melting Onset (Solidus), °C 1390
510
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 15
150
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
37
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
110

Otherwise Unclassified Properties

Base Metal Price, % relative 20
11
Density, g/cm3 7.8
3.0
Embodied Carbon, kg CO2/kg material 3.9
8.1
Embodied Energy, MJ/kg 54
150
Embodied Water, L/kg 180
1140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 200
24 to 49
Resilience: Unit (Modulus of Resilience), kJ/m3 620
85 to 1300
Stiffness to Weight: Axial, points 15
13
Stiffness to Weight: Bending, points 25
46
Strength to Weight: Axial, points 28
19 to 45
Strength to Weight: Bending, points 24
26 to 46
Thermal Diffusivity, mm2/s 4.1
55
Thermal Shock Resistance, points 22
9.0 to 22

Alloy Composition

Aluminum (Al), % 0
90.8 to 95
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 24 to 26.7
0 to 0.1
Copper (Cu), % 1.4 to 1.9
3.9 to 5.0
Iron (Fe), % 58.2 to 65.9
0 to 0.5
Magnesium (Mg), % 0
0.2 to 0.8
Manganese (Mn), % 0 to 1.2
0.4 to 1.2
Molybdenum (Mo), % 2.9 to 3.8
0
Nickel (Ni), % 5.6 to 6.7
0 to 0.1
Nitrogen (N), % 0.22 to 0.33
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 1.1
0.5 to 0.9
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 0
0 to 0.25
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15