MakeItFrom.com
Menu (ESC)

ACI-ASTM CF20 Steel vs. 242.0 Aluminum

ACI-ASTM CF20 steel belongs to the iron alloys classification, while 242.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ACI-ASTM CF20 steel and the bottom bar is 242.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 160
70 to 110
Elastic (Young's, Tensile) Modulus, GPa 200
73
Elongation at Break, % 50
0.5 to 1.5
Fatigue Strength, MPa 240
55 to 110
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
27
Tensile Strength: Ultimate (UTS), MPa 530
180 to 290
Tensile Strength: Yield (Proof), MPa 250
120 to 220

Thermal Properties

Latent Heat of Fusion, J/g 300
390
Maximum Temperature: Mechanical, °C 970
210
Melting Completion (Liquidus), °C 1420
640
Melting Onset (Solidus), °C 1410
530
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 16
130 to 170
Thermal Expansion, µm/m-K 17
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.0
33 to 44
Electrical Conductivity: Equal Weight (Specific), % IACS 2.3
96 to 130

Otherwise Unclassified Properties

Base Metal Price, % relative 16
12
Density, g/cm3 7.8
3.1
Embodied Carbon, kg CO2/kg material 3.1
8.3
Embodied Energy, MJ/kg 44
150
Embodied Water, L/kg 150
1130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 220
1.3 to 3.4
Resilience: Unit (Modulus of Resilience), kJ/m3 160
110 to 340
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
45
Strength to Weight: Axial, points 19
16 to 26
Strength to Weight: Bending, points 19
23 to 32
Thermal Diffusivity, mm2/s 4.3
50 to 62
Thermal Shock Resistance, points 11
8.0 to 13

Alloy Composition

Aluminum (Al), % 0
88.4 to 93.6
Carbon (C), % 0 to 0.2
0
Chromium (Cr), % 18 to 21
0 to 0.25
Copper (Cu), % 0
3.5 to 4.5
Iron (Fe), % 64.2 to 74
0 to 1.0
Magnesium (Mg), % 0
1.2 to 1.8
Manganese (Mn), % 0 to 1.5
0 to 0.35
Nickel (Ni), % 8.0 to 11
1.7 to 2.3
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 2.0
0 to 0.7
Sulfur (S), % 0 to 0.040
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15