MakeItFrom.com
Menu (ESC)

ACI-ASTM CG12 Steel vs. 5454 Aluminum

ACI-ASTM CG12 steel belongs to the iron alloys classification, while 5454 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ACI-ASTM CG12 steel and the bottom bar is 5454 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 160
61 to 93
Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 40
2.3 to 18
Fatigue Strength, MPa 190
83 to 160
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 78
26
Tensile Strength: Ultimate (UTS), MPa 550
230 to 350
Tensile Strength: Yield (Proof), MPa 220
97 to 290

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1040
190
Melting Completion (Liquidus), °C 1410
650
Melting Onset (Solidus), °C 1370
600
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
130
Thermal Expansion, µm/m-K 16
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.1
34
Electrical Conductivity: Equal Weight (Specific), % IACS 2.4
110

Otherwise Unclassified Properties

Base Metal Price, % relative 18
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.3
8.6
Embodied Energy, MJ/kg 48
150
Embodied Water, L/kg 160
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
6.3 to 34
Resilience: Unit (Modulus of Resilience), kJ/m3 120
68 to 590
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 20
23 to 36
Strength to Weight: Bending, points 19
30 to 41
Thermal Diffusivity, mm2/s 4.0
55
Thermal Shock Resistance, points 12
10 to 16

Alloy Composition

Aluminum (Al), % 0
94.5 to 97.1
Carbon (C), % 0 to 0.12
0
Chromium (Cr), % 20 to 23
0.050 to 0.2
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 60.3 to 70
0 to 0.4
Magnesium (Mg), % 0
2.4 to 3.0
Manganese (Mn), % 0 to 1.5
0.5 to 1.0
Nickel (Ni), % 10 to 13
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 2.0
0 to 0.25
Sulfur (S), % 0 to 0.040
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.25
Residuals, % 0
0 to 0.15