MakeItFrom.com
Menu (ESC)

ACI-ASTM CH20 Steel vs. 5652 Aluminum

ACI-ASTM CH20 steel belongs to the iron alloys classification, while 5652 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ACI-ASTM CH20 steel and the bottom bar is 5652 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190
47 to 77
Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 38
6.8 to 25
Fatigue Strength, MPa 290
60 to 140
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 78
26
Tensile Strength: Ultimate (UTS), MPa 610
190 to 290
Tensile Strength: Yield (Proof), MPa 350
74 to 260

Thermal Properties

Latent Heat of Fusion, J/g 310
400
Maximum Temperature: Mechanical, °C 1100
190
Melting Completion (Liquidus), °C 1410
650
Melting Onset (Solidus), °C 1430
610
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 14
140
Thermal Expansion, µm/m-K 15
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.0
35
Electrical Conductivity: Equal Weight (Specific), % IACS 2.3
120

Otherwise Unclassified Properties

Base Metal Price, % relative 20
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.7
8.6
Embodied Energy, MJ/kg 53
150
Embodied Water, L/kg 180
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 200
12 to 39
Resilience: Unit (Modulus of Resilience), kJ/m3 300
40 to 480
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 22
20 to 30
Strength to Weight: Bending, points 21
27 to 36
Thermal Diffusivity, mm2/s 3.7
57
Thermal Shock Resistance, points 15
8.4 to 13

Alloy Composition

Aluminum (Al), % 0
95.8 to 97.7
Carbon (C), % 0 to 0.2
0
Chromium (Cr), % 22 to 26
0.15 to 0.35
Copper (Cu), % 0
0 to 0.040
Iron (Fe), % 54.7 to 66
0 to 0.4
Magnesium (Mg), % 0
2.2 to 2.8
Manganese (Mn), % 0 to 1.5
0 to 0.010
Molybdenum (Mo), % 0 to 0.5
0
Nickel (Ni), % 12 to 15
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 2.0
0 to 0.4
Sulfur (S), % 0 to 0.040
0
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15