AISI 202 Stainless Steel vs. 359.0 Aluminum
AISI 202 stainless steel belongs to the iron alloys classification, while 359.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is AISI 202 stainless steel and the bottom bar is 359.0 aluminum.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 210 to 300 | |
90 to 100 |
Elastic (Young's, Tensile) Modulus, GPa | 200 | |
71 |
Elongation at Break, % | 14 to 45 | |
3.8 to 4.9 |
Fatigue Strength, MPa | 290 to 330 | |
100 |
Poisson's Ratio | 0.28 | |
0.33 |
Shear Modulus, GPa | 77 | |
27 |
Shear Strength, MPa | 490 to 590 | |
220 to 230 |
Tensile Strength: Ultimate (UTS), MPa | 700 to 980 | |
340 to 350 |
Tensile Strength: Yield (Proof), MPa | 310 to 580 | |
250 to 280 |
Thermal Properties
Latent Heat of Fusion, J/g | 290 | |
530 |
Maximum Temperature: Mechanical, °C | 910 | |
170 |
Melting Completion (Liquidus), °C | 1400 | |
600 |
Melting Onset (Solidus), °C | 1360 | |
570 |
Specific Heat Capacity, J/kg-K | 480 | |
910 |
Thermal Conductivity, W/m-K | 15 | |
140 |
Thermal Expansion, µm/m-K | 17 | |
21 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 2.4 | |
35 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 2.9 | |
120 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 13 | |
9.5 |
Density, g/cm3 | 7.7 | |
2.6 |
Embodied Carbon, kg CO2/kg material | 2.8 | |
8.0 |
Embodied Energy, MJ/kg | 40 | |
150 |
Embodied Water, L/kg | 150 | |
1090 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 120 to 260 | |
12 to 15 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 250 to 840 | |
450 to 540 |
Stiffness to Weight: Axial, points | 14 | |
15 |
Stiffness to Weight: Bending, points | 25 | |
54 |
Strength to Weight: Axial, points | 25 to 35 | |
37 to 38 |
Strength to Weight: Bending, points | 23 to 29 | |
42 to 43 |
Thermal Diffusivity, mm2/s | 4.0 | |
59 |
Thermal Shock Resistance, points | 15 to 21 | |
16 to 17 |
Alloy Composition
Aluminum (Al), % | 0 | |
88.9 to 91 |
Carbon (C), % | 0 to 0.15 | |
0 |
Chromium (Cr), % | 17 to 19 | |
0 |
Copper (Cu), % | 0 | |
0 to 0.2 |
Iron (Fe), % | 63.5 to 71.5 | |
0 to 0.2 |
Magnesium (Mg), % | 0 | |
0.5 to 0.7 |
Manganese (Mn), % | 7.5 to 10 | |
0 to 0.1 |
Nickel (Ni), % | 4.0 to 6.0 | |
0 |
Nitrogen (N), % | 0 to 0.25 | |
0 |
Phosphorus (P), % | 0 to 0.060 | |
0 |
Silicon (Si), % | 0 to 1.0 | |
8.5 to 9.5 |
Sulfur (S), % | 0 to 0.030 | |
0 |
Titanium (Ti), % | 0 | |
0 to 0.2 |
Zinc (Zn), % | 0 | |
0 to 0.1 |
Residuals, % | 0 | |
0 to 0.15 |