MakeItFrom.com
Menu (ESC)

AISI 202 Stainless Steel vs. 8011A Aluminum

AISI 202 stainless steel belongs to the iron alloys classification, while 8011A aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AISI 202 stainless steel and the bottom bar is 8011A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 210 to 300
25 to 50
Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 14 to 45
1.7 to 28
Fatigue Strength, MPa 290 to 330
33 to 76
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Tensile Strength: Ultimate (UTS), MPa 700 to 980
100 to 180
Tensile Strength: Yield (Proof), MPa 310 to 580
34 to 170

Thermal Properties

Latent Heat of Fusion, J/g 290
400
Maximum Temperature: Mechanical, °C 910
170
Melting Completion (Liquidus), °C 1400
650
Melting Onset (Solidus), °C 1360
630
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
210
Thermal Expansion, µm/m-K 17
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
56
Electrical Conductivity: Equal Weight (Specific), % IACS 2.9
180

Otherwise Unclassified Properties

Base Metal Price, % relative 13
9.0
Density, g/cm3 7.7
2.7
Embodied Carbon, kg CO2/kg material 2.8
8.2
Embodied Energy, MJ/kg 40
150
Embodied Water, L/kg 150
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 120 to 260
3.0 to 22
Resilience: Unit (Modulus of Resilience), kJ/m3 250 to 840
8.2 to 200
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 25 to 35
11 to 18
Strength to Weight: Bending, points 23 to 29
18 to 26
Thermal Diffusivity, mm2/s 4.0
86
Thermal Shock Resistance, points 15 to 21
4.6 to 8.1

Alloy Composition

Aluminum (Al), % 0
97.5 to 99.1
Carbon (C), % 0 to 0.15
0
Chromium (Cr), % 17 to 19
0 to 0.1
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 63.5 to 71.5
0.5 to 1.0
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 7.5 to 10
0 to 0.1
Nickel (Ni), % 4.0 to 6.0
0
Nitrogen (N), % 0 to 0.25
0
Phosphorus (P), % 0 to 0.060
0
Silicon (Si), % 0 to 1.0
0.4 to 0.8
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15

Comparable Variants