MakeItFrom.com
Menu (ESC)

AISI 303Se Stainless Steel vs. EN AC-42100 Aluminum

AISI 303Se stainless steel belongs to the iron alloys classification, while EN AC-42100 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AISI 303Se stainless steel and the bottom bar is EN AC-42100 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 180
91
Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 45
3.4 to 9.0
Fatigue Strength, MPa 210
76 to 82
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Tensile Strength: Ultimate (UTS), MPa 590
280 to 290
Tensile Strength: Yield (Proof), MPa 230
210 to 230

Thermal Properties

Latent Heat of Fusion, J/g 290
500
Maximum Temperature: Mechanical, °C 930
170
Melting Completion (Liquidus), °C 1420
610
Melting Onset (Solidus), °C 1380
600
Specific Heat Capacity, J/kg-K 480
910
Thermal Conductivity, W/m-K 16
150
Thermal Expansion, µm/m-K 16
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.4
41
Electrical Conductivity: Equal Weight (Specific), % IACS 2.8
140

Otherwise Unclassified Properties

Base Metal Price, % relative 16
9.5
Density, g/cm3 7.8
2.6
Embodied Carbon, kg CO2/kg material 3.0
8.0
Embodied Energy, MJ/kg 42
150
Embodied Water, L/kg 140
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 210
9.1 to 23
Resilience: Unit (Modulus of Resilience), kJ/m3 130
300 to 370
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
53
Strength to Weight: Axial, points 21
30 to 31
Strength to Weight: Bending, points 20
37 to 38
Thermal Diffusivity, mm2/s 4.3
66
Thermal Shock Resistance, points 13
13

Alloy Composition

Aluminum (Al), % 0
91.3 to 93.3
Carbon (C), % 0 to 0.15
0
Chromium (Cr), % 17 to 19
0
Copper (Cu), % 0
0 to 0.050
Iron (Fe), % 67.2 to 74.9
0 to 0.19
Magnesium (Mg), % 0
0.25 to 0.45
Manganese (Mn), % 0 to 2.0
0 to 0.1
Nickel (Ni), % 8.0 to 10
0
Phosphorus (P), % 0 to 0.2
0
Selenium (Se), % 0.15 to 0.35
0
Silicon (Si), % 0 to 1.0
6.5 to 7.5
Sulfur (S), % 0 to 0.060
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.070
Residuals, % 0
0 to 0.1