MakeItFrom.com
Menu (ESC)

AISI 309Cb Stainless Steel vs. 5652 Aluminum

AISI 309Cb stainless steel belongs to the iron alloys classification, while 5652 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AISI 309Cb stainless steel and the bottom bar is 5652 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190
47 to 77
Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 39
6.8 to 25
Fatigue Strength, MPa 200
60 to 140
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 78
26
Shear Strength, MPa 390
110 to 170
Tensile Strength: Ultimate (UTS), MPa 580
190 to 290
Tensile Strength: Yield (Proof), MPa 230
74 to 260

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1090
190
Melting Completion (Liquidus), °C 1420
650
Melting Onset (Solidus), °C 1380
610
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 15
140
Thermal Expansion, µm/m-K 16
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
35
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
120

Otherwise Unclassified Properties

Base Metal Price, % relative 23
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 4.1
8.6
Embodied Energy, MJ/kg 59
150
Embodied Water, L/kg 170
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 180
12 to 39
Resilience: Unit (Modulus of Resilience), kJ/m3 140
40 to 480
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 20
20 to 30
Strength to Weight: Bending, points 20
27 to 36
Thermal Diffusivity, mm2/s 4.0
57
Thermal Shock Resistance, points 13
8.4 to 13

Alloy Composition

Aluminum (Al), % 0
95.8 to 97.7
Carbon (C), % 0 to 0.080
0
Chromium (Cr), % 22 to 24
0.15 to 0.35
Copper (Cu), % 0
0 to 0.040
Iron (Fe), % 56 to 66
0 to 0.4
Magnesium (Mg), % 0
2.2 to 2.8
Manganese (Mn), % 0 to 2.0
0 to 0.010
Nickel (Ni), % 12 to 16
0
Niobium (Nb), % 0 to 1.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 0.75
0 to 0.4
Sulfur (S), % 0 to 0.030
0
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15