MakeItFrom.com
Menu (ESC)

AISI 310HCb Stainless Steel vs. 2117 Aluminum

AISI 310HCb stainless steel belongs to the iron alloys classification, while 2117 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AISI 310HCb stainless steel and the bottom bar is 2117 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190
70
Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 46
26
Fatigue Strength, MPa 210
95
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 78
27
Shear Strength, MPa 410
200
Tensile Strength: Ultimate (UTS), MPa 590
300
Tensile Strength: Yield (Proof), MPa 230
170

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1100
220
Melting Completion (Liquidus), °C 1410
650
Melting Onset (Solidus), °C 1370
550
Specific Heat Capacity, J/kg-K 480
880
Thermal Conductivity, W/m-K 15
150
Thermal Expansion, µm/m-K 16
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.1
40
Electrical Conductivity: Equal Weight (Specific), % IACS 2.4
120

Otherwise Unclassified Properties

Base Metal Price, % relative 28
10
Density, g/cm3 7.9
3.0
Embodied Carbon, kg CO2/kg material 4.8
8.2
Embodied Energy, MJ/kg 69
150
Embodied Water, L/kg 190
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 210
64
Resilience: Unit (Modulus of Resilience), kJ/m3 130
190
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
47
Strength to Weight: Axial, points 21
28
Strength to Weight: Bending, points 20
33
Thermal Diffusivity, mm2/s 3.9
59
Thermal Shock Resistance, points 13
12

Alloy Composition

Aluminum (Al), % 0
91 to 97.6
Carbon (C), % 0.040 to 0.1
0
Chromium (Cr), % 24 to 26
0 to 0.1
Copper (Cu), % 0
2.2 to 4.5
Iron (Fe), % 48 to 57
0 to 0.7
Magnesium (Mg), % 0
0.2 to 1.0
Manganese (Mn), % 0 to 2.0
0.4 to 1.0
Nickel (Ni), % 19 to 22
0
Niobium (Nb), % 0 to 1.1
0
Phosphorus (P), % 0 to 0.045
0
Silicon (Si), % 0 to 0.75
0.2 to 0.8
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.25
Zirconium (Zr), % 0
0 to 0.25
Residuals, % 0
0 to 0.15