MakeItFrom.com
Menu (ESC)

AISI 440A Stainless Steel vs. 6110A Aluminum

AISI 440A stainless steel belongs to the iron alloys classification, while 6110A aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AISI 440A stainless steel and the bottom bar is 6110A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 5.0 to 20
11 to 18
Fatigue Strength, MPa 270 to 790
140 to 210
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 450 to 1040
220 to 280
Tensile Strength: Ultimate (UTS), MPa 730 to 1790
360 to 470
Tensile Strength: Yield (Proof), MPa 420 to 1650
250 to 430

Thermal Properties

Latent Heat of Fusion, J/g 280
410
Maximum Temperature: Mechanical, °C 760
190
Melting Completion (Liquidus), °C 1480
650
Melting Onset (Solidus), °C 1370
600
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 23
160
Thermal Expansion, µm/m-K 10
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.5
42
Electrical Conductivity: Equal Weight (Specific), % IACS 2.9
140

Otherwise Unclassified Properties

Base Metal Price, % relative 9.0
9.5
Density, g/cm3 7.7
2.8
Embodied Carbon, kg CO2/kg material 2.2
8.4
Embodied Energy, MJ/kg 31
150
Embodied Water, L/kg 120
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 87 to 120
47 to 58
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 26 to 65
36 to 47
Strength to Weight: Bending, points 23 to 43
41 to 48
Thermal Diffusivity, mm2/s 6.2
65
Thermal Shock Resistance, points 26 to 65
16 to 21

Alloy Composition

Aluminum (Al), % 0
94.8 to 98
Carbon (C), % 0.6 to 0.75
0
Chromium (Cr), % 16 to 18
0.050 to 0.25
Copper (Cu), % 0
0.3 to 0.8
Iron (Fe), % 78.4 to 83.4
0 to 0.5
Magnesium (Mg), % 0
0.7 to 1.1
Manganese (Mn), % 0 to 1.0
0.3 to 0.9
Molybdenum (Mo), % 0 to 0.75
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
0.7 to 1.1
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.2
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15