ASTM A369 Grade FP11 vs. 60Pd-40Ag Alloy
ASTM A369 grade FP11 belongs to the iron alloys classification, while 60Pd-40Ag alloy belongs to the otherwise unclassified metals. There are 21 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.
For each property being compared, the top bar is ASTM A369 grade FP11 and the bottom bar is 60Pd-40Ag alloy.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
100 |
Elongation at Break, % | 20 | |
1.1 to 28 |
Poisson's Ratio | 0.29 | |
0.38 |
Shear Modulus, GPa | 73 | |
37 |
Shear Strength, MPa | 300 | |
220 to 350 |
Tensile Strength: Ultimate (UTS), MPa | 470 | |
340 to 720 |
Thermal Properties
Latent Heat of Fusion, J/g | 260 | |
140 |
Melting Completion (Liquidus), °C | 1460 | |
1360 |
Melting Onset (Solidus), °C | 1420 | |
1310 |
Specific Heat Capacity, J/kg-K | 470 | |
240 |
Thermal Conductivity, W/m-K | 40 | |
29 |
Thermal Expansion, µm/m-K | 13 | |
15 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 7.4 | |
4.1 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 8.5 | |
3.2 |
Otherwise Unclassified Properties
Density, g/cm3 | 7.8 | |
11 |
Common Calculations
Stiffness to Weight: Axial, points | 13 | |
4.9 |
Stiffness to Weight: Bending, points | 24 | |
14 |
Strength to Weight: Axial, points | 17 | |
8.4 to 18 |
Strength to Weight: Bending, points | 17 | |
9.6 to 16 |
Thermal Diffusivity, mm2/s | 11 | |
11 |
Thermal Shock Resistance, points | 14 | |
16 to 34 |
Alloy Composition
Carbon (C), % | 0.050 to 0.15 | |
0 |
Chromium (Cr), % | 1.0 to 1.5 | |
0 |
Copper (Cu), % | 0 | |
0 to 0.1 |
Iron (Fe), % | 96.1 to 97.7 | |
0 |
Manganese (Mn), % | 0.3 to 0.6 | |
0 |
Molybdenum (Mo), % | 0.44 to 0.65 | |
0 |
Palladium (Pd), % | 0 | |
59.5 to 60.9 |
Phosphorus (P), % | 0 to 0.025 | |
0 |
Silicon (Si), % | 0.5 to 1.0 | |
0 |
Silver (Ag), % | 0 | |
39.1 to 40.5 |
Sulfur (S), % | 0 to 0.025 | |
0 |
Residuals, % | 0 | |
0 to 0.3 |