MakeItFrom.com
Menu (ESC)

ASTM A369 Grade FP12 vs. 5154 Aluminum

ASTM A369 grade FP12 belongs to the iron alloys classification, while 5154 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ASTM A369 grade FP12 and the bottom bar is 5154 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 20
3.4 to 20
Fatigue Strength, MPa 170
100 to 160
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
26
Shear Strength, MPa 300
140 to 210
Tensile Strength: Ultimate (UTS), MPa 470
240 to 360
Tensile Strength: Yield (Proof), MPa 250
94 to 270

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Maximum Temperature: Mechanical, °C 430
190
Melting Completion (Liquidus), °C 1470
640
Melting Onset (Solidus), °C 1430
590
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 45
130
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.3
32
Electrical Conductivity: Equal Weight (Specific), % IACS 8.3
110

Otherwise Unclassified Properties

Base Metal Price, % relative 2.8
9.5
Density, g/cm3 7.9
2.7
Embodied Carbon, kg CO2/kg material 1.6
8.8
Embodied Energy, MJ/kg 21
150
Embodied Water, L/kg 52
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 81
11 to 39
Resilience: Unit (Modulus of Resilience), kJ/m3 160
64 to 540
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
51
Strength to Weight: Axial, points 17
25 to 37
Strength to Weight: Bending, points 17
32 to 42
Thermal Diffusivity, mm2/s 12
52
Thermal Shock Resistance, points 14
10 to 16

Alloy Composition

Aluminum (Al), % 0
94.4 to 96.8
Carbon (C), % 0.050 to 0.15
0
Chromium (Cr), % 0.8 to 1.3
0.15 to 0.35
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 96.8 to 98.4
0 to 0.4
Magnesium (Mg), % 0
3.1 to 3.9
Manganese (Mn), % 0.3 to 0.61
0 to 0.1
Molybdenum (Mo), % 0.44 to 0.65
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.5
0 to 0.25
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.2
Residuals, % 0
0 to 0.15