MakeItFrom.com
Menu (ESC)

AWS BAg-13a vs. A201.0 Aluminum

AWS BAg-13a belongs to the otherwise unclassified metals classification, while A201.0 aluminum belongs to the aluminum alloys. There are 17 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is AWS BAg-13a and the bottom bar is A201.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 92
71
Poisson's Ratio 0.36
0.33
Shear Modulus, GPa 34
27
Tensile Strength: Ultimate (UTS), MPa 180
480

Thermal Properties

Latent Heat of Fusion, J/g 160
390
Melting Completion (Liquidus), °C 890
650
Melting Onset (Solidus), °C 770
570
Specific Heat Capacity, J/kg-K 300
880
Thermal Expansion, µm/m-K 19
23

Otherwise Unclassified Properties

Density, g/cm3 9.8
3.0
Embodied Carbon, kg CO2/kg material 54
8.1
Embodied Energy, MJ/kg 850
150

Common Calculations

Stiffness to Weight: Axial, points 5.2
13
Stiffness to Weight: Bending, points 15
46
Strength to Weight: Axial, points 5.1
44
Strength to Weight: Bending, points 7.2
45
Thermal Shock Resistance, points 7.5
21

Alloy Composition

Aluminum (Al), % 0
93.7 to 95.5
Copper (Cu), % 40.4 to 43.5
4.0 to 5.0
Iron (Fe), % 0
0 to 0.1
Magnesium (Mg), % 0
0.15 to 0.35
Manganese (Mn), % 0
0.2 to 0.4
Nickel (Ni), % 1.5 to 2.5
0
Silicon (Si), % 0
0 to 0.050
Silver (Ag), % 55 to 57
0
Titanium (Ti), % 0
0.15 to 0.35
Residuals, % 0
0 to 0.1